Specifications:

• This Notebook Cooler Pad helps keep your laptop cool and not become a victim of overheating which can cause a number of problems: sluggish performance, battery fires & burnt out processors. Protect your investment by keeping your laptop cool
• This Notebook Cooler Pad coming with 2 fans which can dissipate heat away from your laptop rapidly Lower power consumption via Laptop's USB port, no extra power adaptor needed built-in 2 fans design for easy thermal heat dissipation reducing the over-all temperature of your system for extreme high performance application
• Reduces the overall temperature of your notebook. No extra driver needed for installation
• The Notebook Cooler Pad is constructed by silver color aluminum with groove lined surface which makes it super light
• This Notebook Cooler Pad with 2 build in fans, you can work as long as you like without overheat your laptop
• 4 USB ports of this Laptop Cooling Stand that help users to use another USB device
• USB powered devices consume very little energy, so you can even use the cooler while your laptop is working on its battery
• Very low noise and super heat cooling function
• No power adapter necessary, device is powered through your USB port
• Suitable for most laptop
• Size: 29 x 22.5 x 3.5cm / 11.4 x 8.9 x 1.4in (L x W x T)
• Material: Aluminium(Shell)

Details:

• This USB Laptop Cooler coming with 2 fans which can dissipate heat away from your laptop rapidly

• 4 USB ports that help users to use another USB device

• The USB Laptop Cooler is constructed by silver color aluminum with groove lined surface which makes it super light

Size in Details:




Laptop Cooling Pad Buying Tip:

• When buying laptop cooling pads, choose those that can be folded into more compact units for easier storage as well as transport
• If you intend to take your laptop with you on your long trips, try to look for a cooling pad constructed from lightweight materials

Notebook Cooling Ideas:

• Vented Stands
  If you use your notebook on a solid surface like your desk, you can raise it to increase airflow with a wire mesh notebook stand. Many companies manufacture stands that you place under the notebook. You can often find these at office supply and technology stores for less than $25, but some cost quite a bit more. The best stands have a choice of angles that increase the height and keyboard slant for your comfort. Since these stands are metal, they may have sharp edges, making them uncomfortable for lap use without a cushion.
• Cooling Mats
  Notebook manufacturers and computer accessory vendors sell a wide variety of cooling mats that feature small cooling fans mounted in a pad that cradles your notebook. Although these mats do not increase ventilation, the fans provide additional cooling. The fans use a USB port on your notebook for power. These mats come in a variety of sizes, configurations and prices. They work equally well on your lap or a table.
• DIY Notebook Cooling
  The objective for notebook cooling is to elevate the computer and decrease contact between the bottom and a hard or soft surface. Anyone with basic DIY knowledge can create a stand or pad that fits this job without much cash outlay. Laptop users frequently make minor modifications to everyday household materials to position their laptops at the proper angle to allow ventilation
  Commonly used DIY options include PVC pipe, three-ring binders, corrugated cardboard and even wine corks. Your choice of materials will determine what things you will need to achieve the desired results. If you want to use a large three-ring binder to elevate your laptop, you'll need a drill or punch tool to make ventilation holes in the top surface. One quick solution for cooling is to cut wine corks in half lengthwise and place one half under each side of the laptop at the rear. You could also use rubber doorstops from the hardware store. Both these solutions are portable; drop them in your carrying case for emergencies away from your desk

DIY Laptop Cooling Pad:

• Cut an acrylic sheet according to the size of your entire laptop's surface using a coping saw. Cut a hole in your acrylic to mark the spot that will be placed directly under your computer fan. The hole must be large enough for the extra fan. Cut more holes if you intend to use multiple fans and see to it that the hole fits your fan's size.
• Twist the ends of your USB cable's connector and make sure that the end that remains intact holds the standard connector plug which connects your laptop's port. There should be a total of four wires within your cable--black, white, green and red. Disregard the green and white cables
• Connect your cable's black and red wires to the fan's wires of the same color. See to it that the wires are touching each other while you secure them together using your electrical tape
• Mount your fan inside the hole in your acrylic. Turn the fan in the same direction as the fan within your laptop, and attach it to your acrylic using glue
• Glue your felt circles to the acrylic's edges on the underside. This will give your cooling pad extra clearance will keep your acrylic from scuffing
• Lay your laptop on your cooling pad and make sure your fans line up on both. Plug your pad into one of the USB ports in your laptop to start up the fan

Package Included:

• 1 x Laptop Cooling Pad
• 1 x USB Cable