Camera Lens Hood ET-60 for Canon EF 55-250 / 75-300 / 90-300mm

Specifications:

• ET-60 camera lens hood for Canon EF55-250mm, EF 75-300mm and EF 90-300mm Lenses
• Longer than other lens hoods, this camera lens hood can protect your camcorder very well
• The shape makes this Canon lens hood more effective than the round hood
• Canon lens hood blocks side glare and augments the protection provided by filters to the lens surface and ring
• The bayonet mount design makes it firmly on the lens 
• Jazz up your photos with richer colors and deeper saturation by Canon lens hood 
• This Canon lens hood protects your lens from minor impact
• This is a non-OEM product
• Material: Hard plastic
• Color: Black
• Size: 57.0 x 87.0mm/2.2 x 3.4in(H x Dia.)

Details:

• Anti-glare coating at the inner hood prevents the glare getting into the lens

• Comes with an adjustment ring to ensure proper mounting orientation of the hood on your camera

• This Canon lens hood can protect your lens from minor impact

• The bayonet mount design makes it firmly on the lens

• Jazz up your photos with richer colors and deeper saturation by Canon lens hood

Size in Detail:

How to Use Lens Hood in Studio:

• Remove the lens cap from the camera
• Attach the lens hood to the camera. Lens hoods attach by screwing into, clipping onto, or fitting over the outside of the lens
• Check the shadow of the lens hood. If direct light is passing into the lens, it will appear as a "lens flare". Adjust the lens hood to block direct light by twisting it on the lens
• Check the position of the lights, reflectors and subject. Using a lens hood is preferable in a studio situation in which the lights, reflectors, and subject are set up optimally, but light is still directly entering the lens and causing flares. If there is no better orientation for the studio lighting equipment or subject, a lens hood is the best choice to block excess, flaring light

How to Connect a Canon Lens Hood:

• Attach the lens to the camera body by aligning the red dot on the lens with the red dot on the camera body. If it is an EF-S lens, you will be attaching the white square to the white square instead of red dots
• Align the red dot on the lens hood with the red dot on the end of the lens. The red dot is the same on all lens hoods, regardless if it is an EF lens or an EF-S lens
• Turn the lens hood clockwise until it locks into place. The red dot on the camera should align with the line and circle on the lens hood. The lens hood is now connected to the camera lens

Package Included:

• 1 x Camera Lens Hood for Canon EF 55-250 / 75-300 / 90-300mm