Camera Lens Hood for Canon EW-60C EF-S 18-55mm

Specifications:

• This camera lens hood is designed for Canon EW-60C EF-S
• The camera lens hood is primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens
• This Canon lens hood extends beyond the edge of your lens, shading it and reducing interference from light coming at odd angles
• You also get the added benefit of some extra protection from accidental impact
• Lens hoods block side glare and augment the protection provided by filters to the lens surface and ring
• It prevents glare and lens flare caused by unwanted light
• It will jazz up your photos with richer colors and deeper saturation
• It protects your lens from minor impact
• This is a non-OEM product 
• Material: Hard plastic
• Interface: Bayonet
• Compatible: Canon EW-60C EF-S
• Size: 21 x 81mm/0.8 x 3.2in(H x Dia.)

Details:

• A super cool analog camera patch is just waiting for you to sew it to one of your favorite accessories 

• The Canon lens hood is one of the most important accessory you need for camera lens

• Regardless if you're a casual photographer/videographer or a serious "prosumer" there's a Nikon lens hood designed with your needs in mind

• It is designed with high quality hard plastic material, durable and reliable for long time use

• This Canon lens hood is primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens

How to Use Lens Hood in Studio:

• Remove the lens cap from the camera
• Attach the lens hood to the camera. Lens hoods attach by screwing into, clipping onto, or fitting over the outside of the lens
• Check the shadow of the lens hood. If direct light is passing into the lens, it will appear as a "lens flare". Adjust the lens hood to block direct light by twisting it on the lens
• Check the position of the lights, reflectors and subject. Using a lens hood is preferable in a studio situation in which the lights, reflectors, and subject are set up optimally, but light is still directly entering the lens and causing flares. If there is no better orientation for the studio lighting equipment or subject, a lens hood is the best choice to block excess, flaring light

Methods to Clean Mold on Camera Lens:

• Purchase a cleaning product. These include Clorox Germicidal Spray, Tilex Mildew Remover and 500 PSI Mask Scrub. You can use almost any product that removes mold on glasses or lenses. Read the warning label for the product you choose
• Rub the lens cloth over the camera lens. Remove any grime or dirt that is present. This will allow you to see the damage more clearly
• Dip one lens cloth in warm water. Squeeze out any surplus of water. Extra water can seep into the camera if not careful
• Wipe the lens with the damp cloth. Concentrate on the mold section and any small creases around the camera lens. This will move any remaining dirt
• Spray or pour a drop of cleaner on the second lens cloth. Polish the camera lens thoroughly. Cover ever part of the mold pores including around any creases
• Use the third lens cloth to wipe the moisture off. Towel it completely dry. Then store it in a safe, dry location

Package Included:

• 1 x Lens Hood for Canon EW-60C EF-S 18-55mm