Replacement Battery 3.6V 1800mAh PSP-110 for SONY

Specifications:

• Well made of high quality material can provide you long time using
• This SONY PSP Battery is designed to be used with the PSP
• Internal SONY PSP Battery is an exact equivalent your worn out battery
• An ideal replacement or a perfect spare for your SONY PSP
• This Li-ion SONY Battery is guaranteed to compatible with your device
• This is a non-OEM generic product
• Compatible With: PSP-S110
• Cell Type: Li-ion
• Voltage: 3.6V
• Capacity: 1800mAh
• Color: Black

Details:

• The capacity of this high quality SONY PSP Battery is 1800mAh

• Do not disassemble the SONY PSP Battery pack; it can be dangerous

• You should use the specified charger to charge for the PSP battery

• The PSP battery can absolutely provide you enough power to play

• It is quite easy to put on or remove the battery from your PSP

How to Remove a PSP Battery:

The PSP is a portable videogame system developed by Sony. It allows users to play games, music, videos and even use the Internet. If the battery becomes damaged then you may have to remove it. This is a simple process.

• Turn off your PSP system by holding the "Power" button for a few seconds. Remove any cables from the system and place it on a flat surface. These are safety precautions that must be followed when removing the system's batteries
• Turn the PSP system over to its back side. You should see four screws on the main plate and two screws on top of the system. Loosen the screws and remove them using a Phillips screwdriver
• Remove the casing from the back and top of the system
• Lift the battery to remove it from its slot. You will also have to remove the warranty seal from the underside of the battery

How to Fix a PSP Battery:

If your Sony Playstation Portable (PSP) battery will not hold a charge, it may not be completely dead. There is a chance that you can jump start its ability to hold a charge by priming the cells against each other. Note that this will not work with every "dead" battery, especially if the battery has been physically damaged.

• Remove the battery from the PSP
• Insert one end of each wire into the two terminals, one to the positive and one to the negative. Make sure that the wires do not touch one another
• Wrap the foil around each loose end of the wires, making sure that the wires themselves do not touch
• Allow this connection to sit for about 30 seconds
• Remove the foil and wires, and put the battery back into the PSP. It should be able to take a charge, although you will now need to fully recharge the battery before starting your PSP

Package Included:

• 1 x PSP Battery