1/3" SHARP CCD 420TVL 0Lux 12 IR LEDs Dome Video Camera

Specifications:

• Image Sensor: 1/3" SHARP CCD
• Effective Pixels: PAL: 512(H) × 582(V)/NTSC: 512(H) × 492(V)
• Signal System: PAL/NTSC
• Horizontal Resolution: 420TV Line
• Shutter Speed: 1/50(1/60)-1/100,000sec
• White Balance: Auto
• S/N Ratio: More than 48dB (AGC OFF)
• Minimum Illumination: 0Lux at night (LED ON)
• Video Output: 1.0Vp-p,75Ω
• Backlight Compensation: ON
• Power Supply: DC 12V±10% 350mA
• Operation Temperature: -10℃~+50℃ RH95％Max
• Sync System: Internal synchronization
• Dimensions: Φ98 × 65mm
• LED Number: Φ8 12PCS
• Infrared Lamps: 15m

Details:

• All of features are packed into this vandal resistant housing with cast aluminum case and polycarbonate bubble

• This CCD Video Camera is truly the best choice to combine all the network camera features you want and need

How to Clean a CCD Video Camera:

• Plug the camera in. If the batteries were to die while you're cleaning, the camera will automatically close on your cleaning tools and will need expensive repairs
• Read your camera's manual to find out how to lock the mirror and hold open the shutter. It may be a custom function on your camera, and your manual will describe how to do this. Each camera is slightly different
• Use an air blower to blow air onto the mirror to clean off larger particles of dust. Do not stick the air blower inside the camera. If the camera closes, or the mirror moves, it will scratch it. A foot-powered air pump works well
• Use a sensor brush to clean the camera's sensor. Only use a sensor brush if this is not the first time the camera has been cleaned. Move the brush gently from left to right, take it out and spray it off with the air brush, then stroke the sensor again. Repeat this until the sensor appears clean

Package Included:

• 1 x STD-3412HC Omnibearing IR Dome Video Camera