Signature Series Wall Plate with VGA Female to Female

Specifications:

• The VGA panel allows a quick and easy VGA wall plate connection, so it can bring you much convenience
• Great VGA wall plate supports computer resolutions S-VGA (800x600) and VGA (640x480)
• With advance technology, the VGA wall plate is designed for optimal signal transfer and minimal signal loss
• The VGA panel is great for VGA/S-VGA monitors and video application with 800 x 600 resolution
• Slim compact of the designer VGA panel offers easy professional installation and operation
• The VGA panel is ideal for wall mounted flat panel TVs and LCD/Plasma HDTVs
• Fits on a single gang J-Box or low voltage mounting bracket
• VGA HD-DB15 female jack to VGA HD-DB15 female jack
• Material: Plastic
• Size: 8.6 x 8.5 x 1.6cm/3.39 x 3.35 x 0.63in(L x W x H)

Details:

• Made of high quality and durable plastic material the VGA panel can be used for a long time

• Slim compact makes it easy for you to install, operate and remove

• The VGA wall plate is ideal for wall mounted flat panel TVs and LCD/Plasma HDTVs

• Intelligent construction and delicate design make this VAG panel a good choice for you

• Compact and consise design make this signature series wall plate with VGA female to female easy to clean and adjust

How to Install a Wall Plate:

A wall plate is the final piece of trim work to finish your electrical device installation. Find wall plates at your local home improvement store; they come in a variety of materials including plastic, metal and wood. They also make oversized wall plates that allow you to hide drywall imperfections if the hole in the drywall is slightly too large around the electrical box. Being UL listed, wall plates are required for your home to pass an electrical inspection

• Pick out the correct wall plate for your installation. It should have cutouts that match what your box contains -- including two outlet devices, a switch device and a switch/outlet combination device
• Unwrap the wall plate from its plastic wrapping. This wrapping keeps your wall plate protected and also contains the screws that will secure the wall plate to the electrical device. Set these screws aside for now
• Position the wall plate on the wall over the outlet. Orientation does not usually matter for outlets or switches, but definitely matters if you have an outlet/switch-combination plate. Ensure it fits tightly to the wall, and do not force it
• Place each screw into one of the mounting holes on the wall plate and turn your screwdriver clockwise to tighten the screws. Tighten the wall plate until it's snug against the wall

How to Adjust Wall Plates:

Wall plates around your wall light switches and electrical outlets, decoratively conceal the hole for the junction box. Sometimes wall plates are improperly installed or the hole in the wall is cut incorrectly, requiring some adjustment. Adjusting wall plates varies depending upon the situation. Most adjustments simply require a screwdriver to fix the plate and conceal the hole and junction box

• Turn the screw securing the wall pate to the switch clockwise with a flat-head screwdriver. Light switches have two screws while outlet plates usually have one screw. Do not overtighten the screw. The screw head should fit flush inside the wall plate.
• Replace the screw with a wall plate screw, if the head protrudes above the plate. Wall plate screws have a tapered angle head that fit snugly into the wall plate.
• Loosen a the screw on a wall plate that is crooked and exposing the opening of the junction box. Realigning the wall plate and retighten the screw.
• Purchase wall plate trim at a home improvement center, if the hole in the wall was cut incorrectly for the wall plate to completely cover the hole. Plate trim is rectangular pieces of plastic that fit under the outside edge of the wall plate.
• Remove the screw securing the wall plate and pull the wall plate away from the wall. Place the plate trim on the back of the wall plate, ensuring the trim is evenly extending on each side of the plate. Position the wall plate over the junction box and secure with the screw

Package Included:

• 1 x Wall Plate