Specifications:

• Screen Guard Protector offers durable, transparent surface while keeping the LCD screen clean and unscratched
• Screen Guard Protector attaches smoothly with self-adhering surface, leaves no residue when removed
• Screen Guard Protector always protect against dust and scratches and to eliminate glare
• LCD Protector comes with a free cloth to be used for swiping the screen clean before attaching the protector
• This Protector for Sony is a non-OEM product
• Compatible with: Sony Ericsson M608
• Dimensions: 51 x 38mm / 2.0 x 1.5in(L x W)

Details:

• Protects your screen against scratching, scraping, and abrasion. This Protector for Sony is a non-OEM product

• Screen Guard Protector offers durable, transparent surface while keeping the LCD screen clean and unscratched

• Screen Guard Protector attaches smoothly with self-adhering surface, leaves no residue when removed

• Screen Guard Protector always protect against dust and scratches and to eliminate glare

Usage:

• The first step, clean the screen
• The second part, to protect the membrane labeled "1" of outer torn from the side of the screen to the other side of the screen to paste
• Third, marked "2" tore off the packaging layer to complete

How to Install a Screen Protector:

• Clean the LCD completely. Make sure there is no dust, dirt, grime or smudges on the screen before adhering the protector
• Cut the protector to fit the size of the screen
• Peel the protector back from its film slowly and carefully. After 1 inch of the protector has been peeled away, line up the top of the protector with the top of the screen
• Adhere the protector to the screen. Scrape with a credit card to ensure there are no air bubbles or wrinkles as you work down the screen

How to Remove Screen Protectors:

Removing A Screen Protector With Tape

• Take a piece of scotch tape and place it as one of the corners of your devices display. The tape should overlap with the device and the screen protector
• Pull up very slowly on the scotch tape, making sure that the tape has a hold of the screen protector. Once the screen protector begins to pull up grasp it with your fingers and pull up on the protector
• Use duct tape if the scotch tape is not giving a strong enough grip to pull up the protector. Again pull very slowly to avoid any damage to your device
• Clean the devices screen once the protector is removed. A good product for cleaning mobile devices is the "Proporta Mobile Device Cleaner" simply spray the contents from the bottle on your screen and wipe off any sticky residue using the products included micro-cloth

Removing A Screen Protector. The Blow Dryer Method

• Remove your cell phones battery to avoid damage
• Place your hair dryers setting on low heat and slowly heat up the display on your device. Do not stay in one spot for too long as this can damage your device
• Slowly pull on the corner of your device after applying a slight amount of heat. Do not overheat your device
• Use the Proporta Screen Cleaner to once again clean your screen once the screen protector has been successfully removed

How to Clean Screen Protectors:

• Remove your screen protector, if necessary. Most screen protectors can be removed from the electronic device. You can also clean the screen protector still attached to the device
• Mix the mild soap and water in a bowl. The amount of soap and water depends on the size of your screen protector. Only use a small amount of soap to your mixture
• Dip your cloth in the mixture and ring the cloth, thoroughly. If your cloth is too wet you could damage your screen. Clean your protector in a gentle circular motion until clean
• Dry your screen protector using a dry, soft, lint-free cloth. Clean the rest of your electronic device, if necessary

Package Included:

• 1 x LCD Screen Guard Protector Film for Sony Ericsson M608
• 1 x Cleaning Cloth