1/4" SHARP CCD Square Security Camera Tep-08

Specifications:

• Image Sensor:1/4" SHARP CCD
• Effective Pixels: PAL: 500(H) x 582(V)
• Signal System: NTSC/PAL
• Horizontal Resolution: 420 TV Line
• Minimum Luminance: 0.5Lux
• Lens Mount: 3.7mm MTV
• Back Light Compensation: ON/OFF (optional).
• Auto Electronic Shutter: 1/50 - 1/100,000 sec.
• Auto Gain Control: Auto
• White Balance: ON/OFF switch
• S/N Ratio: > 46 dB
• Power Consumption: 12V±10%DC, 100mA
• Operating Temperature: -20℃ - 50℃
• Sync. System: Internal
• Gamma: >0.45l
• Connection: RCA video out
• Video Output: 1.0 Vp-p/75 Ohms
• Size: 38 x 36 x 35mm/1.5 x 1.4 x 1.4in (L x W x H)

Details:

• 1/4inch SHARP CCD 420TVL Square Security Camera

• It is a great quality outdoor camera that will capture a good picture in very low light

• Can be mounted on a wall or ceiling

How to Clean a CCD Camera:

• Plug the camera in. If the batteries were to die while you're cleaning, the camera will automatically close on your cleaning tools and will need expensive repairs
• Read your camera's manual to find out how to lock the mirror and hold open the shutter. It may be a custom function on your camera, and your manual will describe how to do this. Each camera is slightly different
• Use an air blower to blow air onto the mirror to clean off larger particles of dust. Do not stick the air blower inside the camera. If the camera closes, or the mirror moves, it will scratch it. A foot-powered air pump works well
• Use a sensor brush to clean the camera's sensor. Only use a sensor brush if this is not the first time the camera has been cleaned. Move the brush gently from left to right, take it out and spray it off with the air brush, then stroke the sensor again. Repeat this until the sensor appears clean

Package Included:

• 1 x Square Security Camera