Customers Also Bought
- Weight: 10g
- Speed: 0.3sec/60°
- Stall Torque: 1.5kg/cm
- Voltage: 4.2V-6V
- Temperature: 0℃-55℃
- Dead Band Width: 10us
- Body Size: 23 x 12.2 x 29mm / 0.9 x 0.5 x 1.1in (L x W x H)
- High quality
- Brand new
- Plastic servo
- This is a great upgrade for your helicopter, 3D-flyer, F3A
- This is a great upgrade RC Helicopter Gear Servo for your RC hobby, RC helicopter
- You can use the RC Helicopter Gear Servo to achieve your helicopter dream
- The RC Helicopter Gear Servo has a good Plastic Gear Servo and many accessories
- To achieve the highest performance from your RC helicopter, you need to save weight everywhere - and you've found a great way to do it, and this is the way you are waiting
Designs for RC Landing Gear:
Radio-controlled airplanes with landing gear give the pilot the opportunity to take off from the ground just like a real plane. When a steerable wheel is added, the plane is able to navigate a taxiway for more realism. What type of landing gear to use and why depends largely on the plane.
Tricycle Landing Gear
- Tricycle landing gear have three wheels, like the name implies. One wheel is in the nose of the aircraft and the other two, the main gear, are under the wing. This design is very popular for trainer aircraft that have their wings mounted on top of the fuselage. The nose gear would be steerable. The main gear is usually attached to the fuselage via a U-shaped piece of metal or carbon fiber.
Tail-dragger Landing Gear
- Many warbirds and aerobatic planes have their landing gear set up with the mains under the wings but the steerable wheel under the rudder of the plane. Unlike the tricycle gear, this configuration causes the tail of the airplane to be in contact with the ground until the plane picks up speed. Typically the tail will rise off the ground and the plane will roll along on the mains for a bit before the plane gets airborne. This design is commonly seen on low-wing aircraft.
Retractable Landing Gear
- Retractable landing gear can be either configuration and rely upon a mechanical or pneumatic system to raise and lower the gear. This equipment is used on scale aircraft to give the plane a realistic look while in the air. Retracts will allow the plane to fly faster due to reduced drag. A full-function RC plane will use a servo for each function, throttle, rudder, ailerons and elevator. A separate RC channel and servo must be dedicated to the retracts, so this means using a five-channel system.
- 1 x Tower Pro SG90 Plastic Servo
- 1 x Set of Accessories
If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Before that, please contact our Live Support to inform that.
In that case we will refund you the payment excluding actual shipping fees already incurred.
If the item is defective, please contact DinoDirect Live Support and send an email to us at firstname.lastname@example.org attached an image or video file clearly showing the defect of the product. And we will give you a response within 24 hours whether we will resend the item or refund the payment to you for compensation.
For customization, please consider carefully before ordering.Because we do not accept return and replacement.
|Unit Price||USD$ 6.29||USD$ 5.93||USD$ 5.61||USD$ 5.33||USD$ 5.07|
|Enter Wholesale Channel>>|
• If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
• If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Please contact our Live Support to inform that.
• Please contact Live Chat or click here to learn more return policy.