Mini Laptop Notebook LED Flash Light Cooling USB Fan

Specifications:

• This USB Cooling Fan is compatible with USB1.0 and USB2.0
• Plug & play - no external power need
• Durable soft fan blades make you against injury, colorful magic light while running
• Power saving design, low power consumption
• Gently adjust the flexible neck of USB fan to position the breeze anyway you wish
• Simply plug into any USB port on Notebook or PC to create a gentle refreshing breeze
• Power supply DC 5V direct from USB port
• Perfect for stuffy office or in airplane

Details:

• Especially in summer night, you will feel satisfied when surfing on line with the LED Flash Light Cooling USB Fan

• This USB Fan is soft fan blades - safe and will not cause injury, very easy to carry - compact design, store easily into your briefcase

• Mini and fine design are perfect for your taking along. Bright color also adds more shining points

• The Mini USB Fan is ideal for notebook users, LAN gamers, or anyone using a PC in low-light environment

Desk Fan Types and Uses:

Small desk fans are still essential.Before air conditioning, most offices had electric fans, whether large ceiling fans or smaller personal fans for each desk. Today, even with air conditioning, workstations can be uncomfortably heated by computers. Desk fans, also called task fans, are required. Because modern office work can demand hours of communicating with others, desk fans that run silently are essential

Oscillating Fans:

• Larger oscillating fans are still used in offices, especially in hotter weather. These fans rotate and create sufficient airflow to cool one or more workers effectively. A disadvantage of larger fans can be their noise level. They may also claim too much desk space and blow paperwork around

Clip-on Fans:

• Clip-on fans are often battery powered, saving on energy. They are quiet and, while providing enough airflow to cool the user, do not disturb papers on the desk. They can be clipped anywhere on the desk, freeing up crucial desk space. They can also be moved to suit the user's needs

USB Port Fans:

• USB port fans plug into the very computers that might be causing the heating problem. Using a USB 2.0 connection, these small, quiet fans can have additional uses. Some of them come with a memory card reader while others serve as a USB Hub, providing extra USB ports on the desktop

How to Power a Fan Through a USB Port?

Computer fans run off of 5 volts DC. USB ports provide 5 volts DC and 500 milliamps of power and most computer fans will run at less than 500 milliamps. It makes sense that you should be able to connect a computer fan to the USB port of your computer in order to power it. This is in fact possible, but keep in mind that these are totally different kinds of connections and some custom wiring will be involved. Additionally, a short circuit in your custom wires could burn out your USB port

• Cut the wires of the computer fan as close to the connector, not the fan, as possible. Using the wire stripper, strip 3/8 inch of the insulation from both wires. The computer fan needs to be a two-wire type. The three-wire types are made to be able to control the speed of the fan, which you will not be able to do through a USB port
• Cut off the end of the USB cord. Locate the end that will plug into your computer's USB port and, since this is the end you want to keep, cut off the other end as close to the connector as possible. Using your knife, make a small cut in the outside insulation of the USB cable and peel back the insulation about 2 1/2 inches and cut off the peeled-back insulation. You will have exposed 4 wires: black, red, yellow and green. The yellow and green are useless for this project and can be cut off as close to the outside insulation as possible. Strip 3/8 inch of insulation off of both the red and the black wires
• Cut two pieces of heat shrink tubing, each about 1 inch long. Slide these over the computer fan electrical wires and make sure they stay as far as possible from the stripped wire ends
• Cut about three inches of heat shrink tubing and slide it over the black and red wires of the USB cord and continue sliding until you have slid it over the insulation that holds all four of the USB wires. Make sure the tubing stays as far away from the stripped wires as possible

• Twist together one of the wires from the computer fan and either the red or black wire from the USB cable. Once twisted, solder the two wires together. Bend the soldered connection until it is parallel with the wires and slide the heat shrink tubing over the new connection. Repeat this process for the other wires
• Using a lighter, hold the flame about 2 inches below the tubing and move it back and forth until the tubing shrinks evenly
• Slide the tubing that is on the USB cord over the entire new connection, making sure to cover everything. Again, use the lighter to shrink the tube
• Wrap the entire length of the wires in electrical tape if you want to strengthen the connection

 Package Included:

• 1 x Fan