1.42m 4.6ft USB 2.0 to Parallel DB25F Adapter Cable

Specifications:

• Connects USB port to DB25F port
• Truly Bi-directional communication between PC and printer
• Instantly adds a DB25F female port to your USB equipped PC or laptop
• Fully plug and play compatible
• Support over 1Mbps data transfer rate
• USB A connector to DB25F
• USB specification revision 2.0 compliant
• USB bus powered
• Low power consumption
• System Requires: IBM PC 486DX4-100MHz or higher, USB port, Windows 95 OSR2.1, 98/Me/2000/XP, CD-ROM drive
• Cable Length: 906mm / 35.66in (L)

Details:

• The USB to DB25 Adapter provides you with an external DB25 (Db-25 female) Plug-n-Play connection for use with computers, notebooks, and hand held computing devices that support USB. This cable adapter has a standard type A USB plug

• Instantly adds a DB25 female port to your USB equipped PC or laptop

• USB specification revision 1.1 and 2.0 compliant; USB bus powered, low power consumption

Instructions for Installing the USB to Parallel Adapter

• Windows XP/VISTA (do not install the CD): Plug the cable into the USB port on your computer. A prompt that says "Found New Hardware" will appear. Windows will then install the USB printing support driver. You do not need to install the driver from the CD. Plug the cable into the printer. If your printer is already installed, click on Start, then Printers & Faxes. Right click on the printer you are connecting to and click on Properties. Click on the Ports tab and check the ‘Virtual printer port for USB' port. Click OK/. You should now be able to print.
• Windows 2000/ME (do not install the CD): Follow steps 1 to 3 under Windows XP.  If your printer is already installed, click on Start, Settings, then Printers. Right click on the printer you are connecting to and click on Properties. Click on the Ports tab check the ‘Virtual printer port for USB' port. Click OK. You should now be able to print
• Windows 98SE: Plug the cable into the USB port on your computer. The "Add New Hardware Wizard" will appear. Click Next. Insert the CD into the CD drive on your computer. Click "Search for the best driver for your device" and check the "Search removable media" box. Windows will find the driver. Click Next. When Windows has finished installing the driver, click Finish. Plug the cable into the printer. If your printer is already installed, click on Start, Settings, then Printers. Right click on the printer you are connecting to and click on Properties. Click on the Ports tab check the "Virtual printer port for USB"port. Click OK. You should now be able to print

Package Included:

• 1 x USB 2.0 to Parallel DB25F Adapter Cable