Specifications:

• Improve your hard disk drive performance with this universal Hard Disk Drive Cooling Fan
• This Hard Disk Drive Cooler features plastic contruction with one fan design
• The hard drive cooling fan can reduce hard drive temperature and helps to extend your hard disk drive's life and reliability
• This HDD Cooling Fan connects via a standard 4 pin internal power connection as a self-power mode, no power adapter required
• This HDD Cooling Fan is easy to install
• Its design is universal to fit all hard drives
• Extend the life of your hard disk with hard drive fan
• Rated Voltage: DC 12V 0.12A
• Bearing Type: Sleeve bearing
• Dimension: 129 x 104 x 17mm/5.1 x 4.1 x 0.7in(L x W x H)

Details:

• Improve your hard disk drive performance with this universal HDD cooler
• This is a Universal PC HDD Hard Disk Drive Cooler Cooling Fan. Use this Hard Drive Cooling fan to pull damaging heat away from your hard drive

• It features plastic contruction with one fan design
• Lower hard disk drive operating temperature to achieve maximum performance, reliability, and longer bearing life. Its design is universal to fit all hard drives

• The Hard Disk Drive Cooling Fan offers a balance of high air pressure with balanced airflow and minimal noise levels

• Extend computer reliable and life with this Hard Disk Drive Cooling Fan. It protects your valuable data by keeping your HDD cool

• And the HDD Cooling Fan features efficient heat dissipation and low noise. Perfect design for high compatibility and excellent component cooling

• Saving time and hassle, the HDD Cooling Fan can be installed in minutes, through simple mounting on the mainboard
• This HDD Cooling Fan helps keep the hard disk drive (HDD) from overheating, while improving smooth operation and protecting your valuable data by keeping your hard disk cool

• Improve your HDD cooling performance with this simple attachment. Enhanced cooling environment extends to the life of your computer

How to Install a Hard Drive Cooling Fan:

• Power down and unplug the computer
• Remove the computer's side access panel, which may require the removal of two screws from the back of the computer that secure the panel in place
• Dispel any accumulated static electricity before working inside the computer by touching the metal frame of the computer or using the anti-static wrist strap. Touch the metal frame frequently while working inside the computer if the wrist strap is not used to dispel any built-up static electricity
• Locate the hard drive at the front of the computer below the CD and DVD drives and remove the four screws holding it in place in the hard drive bay. Unplug the cables connected to the back and slide it out of the hard drive bay
• Turn the hard drive over so the green circuit board is facing up
• Locate the four unused screw holes on the underside of the hard drive near the four corners of the circuit board. These mounting holes are placed in these positions to allow for after-market coolers to be installed
• Place the hard drive fan over the hard drive, lining up its mounting holes with the mounting holes on the surface of the hard drive
• Insert one screw into each mounting hole and tighten them until there is a firm grip. Take care not to over tighten the screws as damage to the hard drive and cooling fan may occur. Only use enough force to secure the cooling fan to the hard drive when tightening the mounting screws
• Connect an available four-pin white "Molex" power connector from the power supply to the power cable connected to a hard drive cooling fan. This powers the fan and turns it on automatically every time the system is turned on
• Replace the hard drive into the hard drive bay and secure it back in place with the screws on the sides
• Slide the side access panel back into place, replace the screws, and plug in the computer

Package Included:

• 1 x Universal PC Hard Drive Cooler