Protable Vertical Battery Grip STD-C450D for Canon 450D

Specifications:

• Condition new and high quality vertical battery grip
• Digital camera item features vertical shutter release for easy vertical shooting
• Camera battery grip holds two LP-E5 batteries to effectively double your camera's battery power
• Grip compatible with Canon 450D
• The vertical shutter & function dial simplifies to shot pictures sideways
• More than double the shooting capacity of your digital camera
• Rechargeable up to 500 times
• This Canon Battery Grip retains tripod mounting thread
• Clock, timer, and exposure control
• Sealing material to resist water and dust
• This Canon Battery Grip adds a vertical shutter release
• This Canon Battery Grip is a non-OEM product
• Size: 130 x 103 x 80 mm/5.12 x 5.12 x 3.15 in (L x H x T)

Details:

• DSLR Camera Battery Grip for Canon 20D 30D 40D 50D

• The Canon Battery Grip is both powerful and versatile

• keeping the important ability to stabilize the camera during critical shoots

Usage:

• Determine the camera's power switch has been set in the closed position, open the camera's battery compartment cover to carefully pull out the 35-degree angle, the camera battery inside the battery compartment out. To avoid dropping the battery can be up to the battery box cover is opened
• Camera battery box cover is stored in the handle of the camera battery compartment cover storage place to prevent loss
• Insert the handle column electrodes camera battery room, and to link the camera tripod screw toward the screw, according to tighten the connection as shown in the direction of hand wheel. Found between the camera body and the handle virtual spaces, you need to reinstall the handle
• Thus all the setup all finished. Open the camera power switch, and make sure the camera body there is information on the LCD display before use
• Installation steps can be removed in the opposite handle

NOTE:

• The handle can only be used with compatible devices
• In order to prevent physical access to the power terminal of metal caused a short circuit, do not use the handle, please cover Interface cover
• The handle does not equipped with power switch, use the camera power switch on or off the power
• The battery pack into fire or water, or directly to output short-circuit the battery pack
• Do not break down or assemble the battery pack
• Please use the specified charger to charge
• Independent place or time do not, remove the battery box battery

The Canon Digital Rebel XTi is an entry-level digital single-lens reflex camera, made for the "prosumer" market: the gray area between professional photographer and consumer. Professional accessories, including a battery grip, are available for the camera. This grip adds an extra shutter-release button, as well as storage for additional batteries, prolonging the shooting time available

• Turn the camera over to reveal the battery cover. Use your thumbnail to open the battery door. Hold the orange battery latch back using your thumb, then turn the camera over to drop the battery out of the camera
• Locate the hinge on the battery door. Pull the battery door toward the sides of the camera, at a slight angle, to break it free from the body. The battery door then clicks onto the body of the battery pack, at the vertical section that goes inside the camera
• Place the battery grip into the battery compartment of the camera until the tripod mount screw on the battery grip contacts the threaded hole on the base of the camera. Locate the knurled knob on the front of the battery grip. Turn it to the right to thread the battery grip into the tripod mount on the camera to lock it in place
• Turn on the camera to verify the battery grip is working correctly

How to Install a Hand Grip Battery for a Digital camera?

• Turn the camera over to reveal the battery cover. Use your thumbnail to open the battery door. Hold the orange battery latch back using your thumb, then turn the camera over to drop the battery out of the camera.
• Locate the hinge on the battery door. Pull the battery door toward the sides of the camera, at a slight angle, to break it free from the body. The battery door then clicks onto the body of the battery pack, at the vertical section that goes inside the camera.
• Place the battery grip into the battery compartment of the camera until the tripod mount screw on the battery grip contacts the threaded hole on the base of the camera. Locate the knurled knob on the front of the battery grip. Turn it to the right to thread the battery grip into the tripod mount on the camera to lock it in place.
• Turn on the camera to verify the battery grip is working correctly.

What is an Addon Handgrip or Battery Grip?

Many big brand SLR camera producers including Nikon and Canon, now give photographers the option of an addon handgrip / battery grip. The image below demonstrates what a battery grip looks like without the camera attached.

With a camera attached, it makes the setup look more squarish than rectangular. Apart from looking larger and more impressive, there are other advantages to using a battery grip.

Advantages of SLR Camera Battery Grips

• Battery grips make it easier for those with larger hands to grip the camera. In some cases even those with smaller hands will find it useful when holding the camera in a portrait (horizontal) position.
• Many battery grips nowadays, are designed to hold more than one battery. For example, the battery grip for Canon's EOS 400D (Digital Rebel XT / Kiss), holds two batteries. Many photographers will recall a number of times when they've been midway through a shot, when they find the camera locks up due to a low battery. By the time they've changed the power supply, the shot is long gone. Adding a grip that holds 2 batteries to your setup, will help solve this problem. The camera won't lock up until both batteries are low.
• Some battery grips have an added advantage of weather protection. Many photographers believe they extend the battery life in cold conditions when normally they run down quicker.

Package Included:

• 1 x Vertical Battery Grip