Mounting a camera in a car to film time at the track, street races or motion pictures is a tricky project. Mounts are available in many forms and designed to work in different environments. Knowing where and how to mount a camera on the car requires careful consideration and the right tools.

1. Find the right mount for the job and the camera you use. Handheld camera mounts are available in suction cup and hard mount designs while large motion cameras require heavy-duty mounts that install inside or outside of the car.
2. Determine the best position for the mount based on the application. For track footage, dash or between the front seats mounting is preferred. Over the shoulder mounting allows the camera to capture the cars gauges for performance evaluation.
3. Set up suction cup mounts on the windshield or dash. Ensure the surface is clean before applying the suction cup and test stability between shoots.
4. Drill holes for a hard mount per the manufacturers instructions by locating a stiff surface that won't bend or flex under the weight of the camera. Dashboards and consoles make good mounting locations. Secure the mount with the provided hardware and adjust the camera as desired.
5. Install motion picture cameras on metal supported areas of the car. Remove any molding or covers from the inside of the car before drilling to uncover any hidden obstacles. Drill the holes through the roof, doors or other mounting location and assemble the supports.
6. Tighten the bolts on the camera-mounting frame and test to verify there is no flex in the metal. Connect any extensions and finally place the camera into the mount.
7. Test the camera position and any motorized controls before shooting. Adjust shooting angles and verify the camera is secure.