Wireless Eight Security Zone Alarm Host System JBA-2000D

Specifications:

• Power Supply: AC 220V ± 10% DC = 9V 300mA
• Backup Battery: Ni-MH rechargeable batteries Environmental: DC = 7.2V 270mAh
• Current: Ls ≤ 45mA
• Alarm Current: La ≤ 250mA
• Wireless Receiving Frequency: 315MHz ± 0.5 MHz
• Wireless Receiver Sensitivity: -95dBm @ 12dB sinad
• Interference strength: -40dB (frequency range 30M-1000MHz)
• External Alarm Horn Sound Intensity: 110dB
• Working Environment: Temperature 0 ℃ -45 ℃; Relative humidity: ≤ 90%
• Detectors Can Be Configured Capacity: Each zone 10
• Reliability: National standards
• False Positive Rate: 2 times / year
• Omission Rate: 0 times / year
• Size: 158 x 110 x 30mm / 6.2 x 4.3 x 1.2in(L x W x H)

Features:

• Host color backlit LCD display screen in Chinese
• Full English user interface, with zone type, location, type of detector, alarm phone numbers, passwords, dates and other information, so that the user at a glance
• Full-function device keyboard, allowing users on this machine can complete all the feature set
• Full voice prompts function remote control, remote control and easy operation
• With 8 wireless zone, seven wired zone, and has powerful programming capabilities zone
• System has to go out at home and deployed two kinds of deployment and the deployment model, both to go out or at home can use
• System can record 10 seconds voice message. 4 groups of users can dial telephone numbers and 2 alarm center telephone group
• Alarm can use this anti-speech code or police intelligence categories
• By telephone remote control multi-channel electrical appliances off
• Via telephone remote cloth / disarm, listen in the sound
• Can store up to 40 cloth / disarm and alarm history information, including the time zone, alarm detector location details
• Has a detector automatic inspection technology, the host, if not received within 24 hours sent the information detector, it will inspect fault indicator lit, the corresponding position displayed on the screen to remind the user detectors may be a problem
• Zone alarm can be set to 20,40,60 seconds delay, so that you avoid with a remote control. Can be moved away after marrying keyboard
• And Alarm Center, connected to achieve cell alarm network management
• Alarm systems can grab line. Whether in a telephone hook or hook, alarm, the system will grab line priority alarm
• There are cut-line warning system function, when the phone lines were destroyed, the host every 1 minute issued a "tick, tick, tick" sound of the rapid reminder, alarm horn will be sounded continuously
• UPS backup power system configuration, power failures, able to work after more than 24 hours after the call will be automatically charged
• System state memory function, when the mains power off and back-up power supply runs out after health call, the system remains before power-down state
• Remote Multi-function remote control home appliances
• The system has lightning protection function

Details:

• This is Wireless eight security zone alarm host system JBA-2000D. This Wireless Home Alarm System hsa Full English user interface, with zone type, location, type of detector, alarm phone numbers, passwords, dates and other information, so that the user at a glance.Wireless Home Alarm System can record 10 seconds voice message

• All kinds of slots and cards interface.The Wireless Home Alarm System is based on GSM network.After receiving the call, user can do a series of remote control operation according to requirement

• The home security instruction.With a GSM SIM card, Wireless Home Alarm System can be used wherever you want, and there is no need to connect to a telephone line, Wireless Home Alarm System is more convenient and easier to install and use

• The Wireless Security Alarm System provides you and your family safety. The Wireless Security Alarm System is the most affordable, technologically advanced, sophisticated, yet easy to use and install wireless home or office security systems available today

• Durable power adapter.This Wireless House Alarm System is necessary equipment for school, office, shopping and anywhere place which need safety

• Clearly shows that the position of the invaders, meanwhile, alarm host through the Network dialer rotary to the telephone number which user setting, and play the recorded voice

Size in Detail:

Operating instructions:

• Use the double -side adhesive tape to fix the main unit at the side of the door/window. Attach the bar magnet to door frame/window frame with the arrow aligning with the refernce line of the main unit.
• Test the setup by switching the system's switch to "ON" position of the main unit and see whether the alarm can be triggered by opening the door/window

How to Install Door Sensors for a Home Security Alarm System?

• Chances are, a thief will walk right through a back door or storm door to gain entry into your house. If you install door sensors for a home security alarm system, you won't prevent the thief from opening the door, but you will make the burglar run. Most door sensor kits have a main unit that relays information to the security system coupled with a set of magnetic switches. Read more: How to Install Door Sensors for a Home Security Alarm System

Instructions:

• Select the door that will have a door sensor. Clean the interior surface of the door so it is free of any dirt or gunk. Also clean the area of the wall where you plan on attaching the main unit of the door sensor kit
• Round up a screwdriver, electric drill and a carpenter's pencil, as well as a level. You may also need a stud finder and/or drywall anchors
• Use the stud finder to locate a stud as close to the top of the door frame as possible. If you can't find a stud, you will need to use the drywall anchors to make a secure attachment to the wall
• Hold the main unit of the door sensor up to the wall. Level it, and then mark where the top of the unit is on the wall with the carpenter's pencil. Also mark the location of the unit's screw holes on the wall
• Drill pilot holes for the screws. If you are not drilling into a stud, make holes for the drywall anchors instead, then insert the anchors into the wall. Screw the unit to the wall
• Pick a location on the door and on the door jamb to install the magnetic switches. The switches have to be placed so that they will come in contact with each other when the door is closed and contact is broken when the door is opened
• Mark the location of the magnetic switches and drill pilot holes. Attach the magnetic switches. Now, set up your home security system to recognize signals from the newly installed door sensor

How to Choose a Home Alarm System?

Conducting Preliminary Research

• Alarm systems for the home can be complicated and expensive, so it's crucial to determine your security needs before you begin consulting with alarm companies
• Survey your home and determine how many windows and doors you want to be 'switched,' or integrated into the home security system
• Determine possible locations for the control panel and keypads. You might find it convenient to place a keypad close to the front door. You might also want a keypad close to the bedrooms. The control panel commands the system, and the keypads allow you to program the system and turn it, or its components, on and off
• Determine how far away windows and doors are from the control panel so that you know how far wires will be routed if you choose a wired alarm system or how far a wireless system needs to communicate with sensors. Keep in mind that it is difficult to install a hard-wired security system unless your house is still under construction
• Decide whether you want a monitored security system that will be monitored 24 hours a day. The central monitoring station 'watches' your home for a monthly fee. A less expensive alternative is a basic sensor system with a dialer accessory that connects the system to your phone lines and dials preselected numbers if the house's security is breached
• Consider your lifestyle. Does anyone in the family often get up in the middle of the night for a snack? Do you have a large pet that roams the house at night? Such circumstances will influence the type of motion sensor you select and how it is installed. It may also call for you or members of your family to take trips to the keypad to prevent false alarms

Choosing the System

• Consult with a reputable home security system adviser
• Choose a system with a control panel that can monitor all the zones you have in your home. Each window or door integrated into the system is considered a zone. A basic system is capable of controlling eight zones. However, many panels permit the addition of expansion modules that allow the system to watch up to 32 zones
• Determine if the routing of the wires for a hard-wired security system might be too long. With a wired system, you will have to drill holes in walls where wires will have to be routed. If the wire run appears too long to you, choose a wireless system
• Make certain that a wireless system can perform up to the distance of the farthest zone
• Be certain that the system you choose can accept fire-protection sensors, carbon monoxide sensors and combustible-gas detectors, anti-freeze-up low-temperature switches (especially in cold climates) and water detectors. Make sure that panic buttons are or can be included
• Choose a system that is user-friendly. Make certain that inputting codes into the keypad is not a complicated process and is one that everyone in the family can learn quickly. You don't want to have to refer to the owner's manual as you input or try to interpret codes
• Work the keypad of the system you select to assure yourself that it is easy to use. Encourage all family members to work the keypad so that you will select one that everyone can use comfortably

Package Included:

• 1 x Alarm Host
• 1 x Wireless Dual Infrared Detector
• 1 x Wireless Door Sensor
• 1 x Alarm
• 2 x Remote Controls
• 1 x UPS Power Supply