Customers Also Bought
- Built-in microphone for audio monitoring
- 4 channels available to avoid interference
- Min 100m transmission distance without block
- Suitable for monitoring children and elders, and widely used for theft prevention, after-hours surveillance, home security
- Wireless Camera: 380TV lines Sharp picture display
- Imaging Sensor: 1/3"CMOS
- CMOS Total Pixels: PAL: 628x582; NTSC: 510x492
- Horizontal Resolution: 380 TV lines
- View Angle: 62 Degree
- Minimum Illumination: 1.5 Lux/ F1.5
- Gain Control: Automatic
- Frequency: ISM 2,400MHz~2,483MHz 4CH
- Transmission Power: 10mW
- Modulation Mode: FM
- Bandwidth: 18MHz
- Unobstructed Effective Range: 100m
- Consumption Current: 80mAh
- Operating Humidity: 85% RH
- Operating Temperature: -10C~>50C / 14F~122F
- Storage Temperature: -40C~-85C /-40F~>185F
- Channel Frequency: CH1=2414; CH2=2432; CH3=2450; CH4=2468 (MHz)
- Wireless transmission and reception
- Small size & Light weight
- Low Power consumption & High sensitivity
- Easy to connect and install
- Receiving Frequency: ISM2,400MHz~2,483MHz
- Intermediate Frequency: 480MHz
- Antenna: 50ohm SMA
- Receiving Sensitivity: -85dB
- Power Supply: +8V
- Consumption Current: 180mA
- TV System: PAL/CCIR; NTSC/EIA
- Operating Temperature: -10℃+50℃/ +14℉+122℉
- Storage Temperature: -30℃+85℃/ -22℉+185℉
- Operating Humidity: 85%RH
- Connect the antenna to the Receiver
- Connect the Adapter (DC8V 500mA) to the Receiver
- Connect the Receiver to a monitor/TV with AV Cable (yellow for Video and red for Audio)
- Power on the monitor/TV and select AV mode
- Set the channel of Receiver same as that of Camera by pressing the Channel button continuously, and the pictures are displayed on the Monitor/TV
- Adjust the brightness, contrast and color of the monitor/TV for the Perfect effect
- Insert the DC 8V 500mA adaptor into the power jack of the Camera
- Auto switch between up to 4 wireless Cameras SCAN The green color indicating lamp change a time each five a time
- Affordable wireless surveillance solution for easy installation, no more hassle or messy cables needed, could be installed indoor or outdoor wherever you need to keep an eye on your family or property. Cameras to receiver connection use 2.4GHz wireless transmission
- Setup in seconds with digital wireless technology for clear video and audio
- Installation and set up were simple and easy
- Easily installation, plug and play just connect receiver to your TV or VCR, This system can be used to monitor and record video and audio in any indoor or outdoor space at any time of the day
- 1 x 2.4GHz Wireless 4 Channels Receiver
- 1 x Security CCTV 1/3"CMOS Color Camera
- 1 x Battery Connector
- 1 x Audio/Video Cable
- 1 x 5V 1A Switch Power for Receiver
- 1 x Traveling Charger for Camera
If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Before that, please contact our Live Support to inform that.
In that case we will refund you the payment excluding actual shipping fees already incurred.
If the item is defective, please contact DinoDirect Live Support and send an email to us at email@example.com attached an image or video file clearly showing the defect of the product. And we will give you a response within 24 hours whether we will resend the item or refund the payment to you for compensation.
For customization, please consider carefully before ordering.Because we do not accept return and replacement.
|Unit Price||USD$ 41.47||USD$ 39.51||USD$ 37.54||USD$ 34.93|
|Enter Wholesale Channel>>|
• If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
• If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Please contact our Live Support to inform that.
• Please contact Live Chat or click here to learn more return policy.