2.4GHz Wireless 420TVL 2 CMOS IR Cameras & 7" LCD Monitor Security System WRC840-2WCM705

Specifications: 

• 2.4GHz Wireless 420TVL 2 CMOS IR Cameras & 7inch LCD Monitor Security System WRC840-2WCM705
• 7 inch digital color TFT LCD monitor, 2.4GHz 4 channels security CCTV wireless AV receiver monitor, composite video, one-way AV input, 480 x 234 resolution, internal speaker, with full functions remote control, DC12V input voltage
• Wireless 2.4GHz, 1/3 inch vimicro 0702 vision chip, 420TV lines, 9 LED infrared day and night weather-proof, security CCTV wireless color CMOS camera
• This LCD monitor security system is a powerful yet small security camera that doesn't draw attention and blends in well with its surroundings
• This wireless monitor security system will keep you safe and secure because you'll always know what's going on around you  
• This LCD monitor security system will make your life a little bit easier as it's the perfect way to keep an eye on your home, office, car and more

Camera:

• TV System: PAL/NTSC
• Validity Pixel: PAL: 628(H) x 582(V), NTSC: 510(H) x 492(V)
• Image Device: Vimicro 0702 Vision CMOS
• Horizontal Definition: 420 TV Lines
• Angular Field of View: 45 °(f=6mm)
• Minimum Illumination: 0 Lux
• Night Vision Range: 8m
• Band Width: 20M
• IR LEDs: 9 IR LEDs
• Synchronization System: Internal
• Scanning Frequency (H): PAL: 15.625KHz, NTSC: 15.734KHz
• Scanning Frequency (V): PAL: 50Hz, NTSC: 60Hz
• Backlight Compensation: Auto
• Electronic Shutter: 1/50(1/60) ~ 1/100,000 Sec
• White Balance: Auto
• S/N Ratio: >48db
• Gamma Correction: >0.45
• Operation Temperature: -10 ~ +50 / +14 ~ +122˚C / ˚F
• Transmission Frequency: ISM 2,400 ~ 2,483MHz
• Power Supply: DC +12V

Receiver:

• Aspect Ration: 7 inch(16:9)
• Display Element: Color TFT LCD
• Video System: PAL/NTSC
• Active Area: 154.08 x 86.58 mm
• Resolution: 480(H) x RGB x 234(V)
• Receiver Channel: 4 Channels
• Brightness: 200cd/square meters
• Contrast Ratio: 300:1
• Db Level: -90dB
• Composite Video (AV): One-way AV input
• OSD Language: English
• Input Voltage: DC 12V
• Max Power Consumption: ≤8W
• Receiver Channel: CH1: 2414MHz, CH1: 2432MHz, CH1: 2450MHz, CH1: 2468MHz
• Size: 190 x 143mm / 7.5 x 5.6in(L x W)
• 7 inch TFT LCD 2.4GHz 4 channels wireless AV color monitor
• PAL/NTSC system
• Environmentally friendly design
• Remote control with full functions

Details:

• This wireless monitor security system will make your life a little bit easier as it's the perfect way to keep an eye on your home, office, car and more

• This wireless monitor security system is of excellent performance and environmentally friendly

• Vimicro 0702 Vision CMOS camera, capture everything for you, and provides you HD pictures

• Made of high quality material, the wireless monitor security system is durable and reliable for long time use

How Does a Baby Monitor Work?

• Basics: Since babies sleep a lot and new parents can't stay in the room with a baby the entire time, the baby monitor is a great way to listen for sounds of distress from the child. A baby monitor is a device that sends sound over a one-way radio frequency to a receiver. The distance the sound is projected varies between different models. Most baby monitors are built to work within a distance of about 150 feet. The transmitter is placed in the room with the baby and should be plugged in no more than 10 feet away from the crib. The receiver is usually portable and carried around with the parent throughout the house and outside on the porch or in the yard
• Issues: The radio frequency used to transmit sound from the baby to the caregiver is the same frequency used for cordless telephones and other transmissions that can come from police and emergency signals. More expensive models are built with higher frequency abilities that can eliminate outside interference. Baby monitors used by neighbors also can provide interference in listening to a child in one household. Monitors that come with a scrambler can minimize and remove any outside interference. To work, baby monitors must be turned on at both ends. Less expensive baby monitors that run on batteries may leave parents under a false impression that they are secure in their ability to hear when the baby wakes up
• Advanced: Look for features that allow the baby monitor to work through any number of scenarios. Monitors such as the Evenflo Monitor and Intercom are usually less than $80. They beep when the battery is low and provide an option to turn the sound down and display noise by emitting a flashing light, which may be useful when parents do not want to disturb others in the room. The Evenflo model also features a two-way sending option that allows parents to speak back to the child, sometimes soothing the infant back to sleep. More advanced baby monitors come with video displays that send pictures to the receiver over a digital wireless signal. Audio/video baby monitors such as the Babyview20 by Levana run closer to $200. High-speed microprocessors are built into the latest baby monitors that are placed under the sleeping baby and detect movement. If the baby stops moving for more than 20 seconds, an alarm sounds. Movement detection monitors such as the Babysense V from BabySafe also include the traditional sound monitor and cost about $100

How to Buy a Baby Monitor

Baby monitors are radio transmitters that allow you to hear your baby when you're not present in the room with her. Monitors come in a variety of styles and include many different features, so follow these steps to buy one that suits your needs and lifestyle

• Look for a baby monitor with a small receiver, which will make it more convenient for you to tote around your home. Make certain the baby monitor will run on batteries
• Buy a baby monitor with a light that activates when it picks up sound. This feature will allow you to know your baby is awake and needs you when you're running the dishwasher, listening to music, or vacuuming and cannot hear the noise from your baby's room
• Find a baby monitor that includes two receivers which will allow you to leave first receiver in your bedroom or another room you frequent often, and carry the second receiver around the house with you
• Verify that you can easily clip or attach the baby monitor's receiver to your belt loop if you plan on carrying it around with you
• Search for and buy a baby monitor that includes a low-battery light; when lit, it indicates that you need to replace the batteries
• Research the bandwidth you need for your home. Pricier baby monitors include a bandwidth of 900 megahertz, which provide great reception, but this kind of reception is only available in suburban or rural areas. If you live in an urban area with a lot of interference, a baby monitor with 40 megahertz should suit your needs just fine
• Purchase a multiple-room baby monitor if you have more than several children you need to care for. These baby monitors often come with up to three transmitters and receivers for three different rooms, and can help you keep tabs on all three rooms or a single room

Tips & Warnings

• Baby monitors are priced from $50 to $100 for transmitter and receiver models, and close to $300 for baby monitors that include a video monitor
• Keep a baby monitor away from water at all time to prevent the risk of electrocution

Package Included:

• 1 x 7 inch TFT LCD 2.4GHz 4-Channels Wireless AV Color Monitor
• 2 x 2.4GHz, 1/3" Omn Vision Chip Wireless CMOS Color Cameras
• 3 x Adapters
• 1 x AV Cable
• 1 x Remote Control
• 1 x Antenna