2.4GHz Wireless CCD Camera and Receiver Security System CM-WXL3621CW

Specifications:

Camera:

• Signal Format: PAL/NTSC
• Image Device: 1/4in Sharp CCD
• Infrared Led: Ф5mm LED 36pcs
• Number of Pixels: PAL: (H)500 x (V)582, NTSC:(H)510 x (V)492
• Scanning System: NTSC:525 Lines.60 Field/Sec, PAL: 625 Lines 50 Field/Sec
• Electronic Shutter: PAL: 1/50-1/100000S, NTSC: 1/60-1/100000S
• Sync System: Internal synchronization
• Lens: 3.6mm
• Horizontal Resolution: 420 TV Lines
• S/N Ratio: >46dB
• Gamma: 0.45
• B.L.C: Auto
• Gain Control: Auto
• Operation Temperature: -10℃~+50℃, RH 95% Max
• Storage Temperature: -20℃~+60℃, RH 95% Max
• Minimum Illumination: 0 Lux (led on)
• Power Supply: 12V ± 10% DC, 100mA

Receiver:

• Channel Frequency: CH1=2414MHz / CH2=2432MHz / CH3=2450MHz / CH4=2468MHz
• Channel: 1-4 ( Button-type switch)
• Modulation Mode: FM/AM
• Antenna: High gain directional SMA antenna
• Power Supply: 12V ± 10%DC
• Scan Function: Auto/Manual channel scanning mode
• Video Output: 1 Vp-p 75 Oms
• Audio Output: 300V at 600 Oms

Details:

• This CCD camera security system will make your life a little bit easier as it's the perfect way to keep an eye on your baby, home, office, car and more

• The wireless camera security system features 1/4in Sharp CCD image sensor, provides HD pictures 

• The wireless camera security system is easy to install, plug and play

How to Protect Your Home With an Outdoor Security Camera?

• Determine the purpose of your outdoor security camera: will you be monitoring to see who comes up to your front door or do you want to be able to watch all angles of the perimeter of your house and yard?
• Determine the view angle you need from your camera. In general, the wider the view the more the camera will record. This is particularly important if you will be using your camera to see who is approaching your front door and you want to be able to determine whether or not they are alone
• Determine the picture quality that you will need from your security camera and choose a camera that will provide it. While many screens are small and can use a lower resolution, a higher resolution will provide a clearer picture
• Choosing a wireless security camera? Choose a camera with a transmission range that will suit your needs; keep in mind that the walls of your home will reduce the range a wireless camera will have
• Planning to record the signal? Choose a camera that will broadcast to the system that you have chosen: closed circuit tv, your computer or a digital video recorder

• Do you want to have a camera that will be on all the time or do you want a camera that will start recording when movement is detected? Either way, a motion detector camera can make sure that you are able to record anything that happens
• Determine the size and type of security camera you are looking for. Do you need a camera that can zoom in, a camera that blends in or a camera that can record sound?

• Lastly, determine whether you want a camera that is monitored by a security company or not; if you do, be sure to choose the right company. Ask questions and get recommendations

How to Install an Outdoor Security Camera System?

• Select the type of connection you want; you can choose a wired or a wireless connection. Wireless systems are easier to install with no limitations on the distance between the devices and the monitors. Be aware, however, that wireless connections are subject to signal interference. If you choose to install a wired connection, it will require more work, but you won't have any signal interference. Wireless cameras are also battery-operated, so you will have to replace the batteries periodically. Wired cameras connect to the monitors, which run on the main power source

• Decide where you want your security camera. Place your camera in a position that will display the entire area you wish to view. Then, decide whether you want your camera visible or hidden. If you set up a wired camera system, hiding and wiring your device will be more difficult
• Drill holes for mounting the brackets. If you are setting up more than one camera, make sure you allow enough distance in between. Test your camera or cameras by turning them on and placing them in position. View the coverage area and decide where to drill your holes. If you are using a wired system, make sure the camera cables are long enough to connect your camera to your monitor

• Attach the brackets using the screwdriver. Regardless of whether your camera is on the ground or on a wall, you will need brackets to securely position your camera. Make sure your brackets are tight and stable enough to hold the camera
• Mount the camera on the brackets. Make sure everything is tightly secured
• Select a location for your monitor. The monitor should be where you spend the most time. If you are using a wireless system, you have completed the setup process

• Run a cable from each camera to your monitor if you are using a wired system. Cables can run along door and floor edges or under a carpet. Use electrical tape or a staple gun to secure your wires. If your monitor does not have multiple plugs for your camera cables, you need to purchase a multiplexer. Plug your camera cables into the multiplexer and plug the multiplexer into the monitor
• Turn on your system to view your area

Application:

Precautions:

• Recommend to use the camera with the monitor which has the stan standard video input impedance level of 75oms, if in any case your monitor is set to high impedance mode, please switch them on it or standard impedance position. If the monitor do not have the impedance adjust switch, please ask us for a camera suitable for your monitor
• Do not attempt to disassemble the camera. There are no user serviceable parts inside. Reter servicing to qualltied service personal
• Never face the camera toward the sun. If may cause a smear on the picture when the camera is directly faced to the sun or spot light or light reflecting objects
• Not expose the camera to rain or moisture, or do not try to operate the camera in wet area. Moisture can damage the camera and can create the danger of electric shock

Package Included:

• 1 x 2.4GHz 36 Infrared LED Day/Night Security CCTV Wireless 1/4" Sharp Chip Color CCD Camera
• 1 x 2.4GHz Wireless 4 Channel Frequency Auto/Manual Receiver
• 1 x DC 12V Power Adapter for Camera
• 1 x DC 12V Power Adapter for Receiver
• 1 x Bracket for Camera
• 1 x AV Cable