2.4GHz 4 Channel Receiver & 4 Color CMOS Wireless Cameras Security System WRC815+WCM706

Specifications:

• This is a set of clear and remote wireless supervision system
• The appearance of the receiver is beautiful and the channels of the two cameras can be changed by hand or automatically
• The Wireless Receiver Camera Set has the function of backlight compensation, automatic white balance and so on, it has 24 IR LED, when the illumination is below 2 ~ 4 lux, the Infrared will open automatically and can reach the best night vision effect
• The supervised picture is clear and the color is bright
• The Camera Receiver Set is suitable for the surveillance of residence area, office, supermarket, hotel, warehouse, hospital, etc.
• Infra-red LEDs for night-time vision, effective night vision range 15m
• 380TV lines clear picture display, weather-proof design for outdoor usage, alloyed shell
• 4 channel real-time wireless receiver, alloyed shell, antenna can be change by yourself
• Built-in microphone for Audio monitoring
• Minimum 100m transmission distance without block
• Transmission Frequency: ISM 2.414 ~ 2.468 GHz
• Transmission Power: 10mW/CE, 2mW/FCC
• Unobstructed Effective Range: 100m(Minimum)
• Modulation Mode: FM
• Operating Temperature: -10 ~ +50(Degree C) / +14~ +122(Degree F)
• Storage Temperature: -20 ~ +60(Degree C) / -4 ~ +140(Degree F)
• Operating Humidity: ≥85%RH

Camera:

• Imaging Sensor Type: 1/3 Inch OV Image Sensor Chip
• Picture Total Pixels: PAL: 628 x 582 Pixels, NTSC: 510 x 492 Pixels
• Horizontal Resolution: 380 TV Lines
• View Angle: PAL: 50, NTSC:60
• Minimum Illumination: 1 Lux
• Night Vision Range: 15m
• IR LEDs: 24pcs LEDs Infrared
• Bandwidth: 25M
• Angular Field of View: 45° (F=6mm)
• Power Supply: DC +5V

Receiver:

• Antenna: 50 ohm SMA
• Receiving Sensitivity: >=-85dBm
• Video Output Signal Level: 1.1Vp-p ~ 0.2Vp-p @75 ohm, S/N >38dM
• Audio Output Signal Level: 3.0Vp-p ~ 1Vp-p @600 ohm
• Power Supply: DC +5V

Details:

• The wireless camera receiver set has high quality and durable features which can comfort your requirements all the time

• This Camera Receiver Set is manufactured with international new integrated circuit and TFT colorful liquid crystal display technology

• Setup in seconds with digital wireless technology for clear video and audio
• This wireless camera receiver set is ideal for monitoring entrances, backyards, valuables and employees

How to Set Up a Camera Security System?

Camera security systems have become relatively inexpensive over the past few years, certainly contributing to their steady rise in popularity within homes across America. Not only do these systems give your home an added level of security, also giving you peace of mind, they're also quite easy to install with the right materials and a little ingenuity.

• Select the location you wish to monitor and mount your camera within the general area. High vantage points with the camera pointed downward are typically considered the best angles for capturing large areas.
• Connect the video output jack of the wireless receiver with the video input jack of the monitor using the yellow-headed composite video cable. Both jacks will be painted yellow, indicating video.
• Turn on all the devices, setting the monitor to the proper video channel. Generally this is the channel below "001" (or channel "000") and is typically labeled "AUX" or "VIDEO."
• Synch the wireless receiver to the wireless camera's frequency by scanning through the receiver's frequencies until the image from the camera appears on the monitor. This is similar to scanning through radio stations.
• Place the monitor and receiver in the room you wish to serve as your monitoring center.

Package Included:

• 4 x Wireless CMOS Color Cameras
• 1 x Wireless Receiver
• 4 x Adapters for Camera
• 1 x Adapter for Receiver
• 4 x AV Cables
• 1 x Remote Control