EN Universal Quick Battery Charger for XBOX 360 Wireless Controller

Specifications:

• Quickly recharge up to two battery packs at the same time
• With the XBOX 360 Controller Charger, you can recharge in a flash and kiss disposable batteries goodbye
• A cleaner charging solution - no wires to plug into your console
• High quality XBOX 360 Controller Charger for XBOX 360 wireless controller
• XBOX 360 Controller Charger connects to XBOX 360 console or anything with a USB port
• Charge one battery pack in less than two hours -- or two packs in less than four hours
• XBOX 360 Dock recharge the battery pack by using USB connection
• Battery offers up to 25 hours of play per charge
• Always ready and easily accessible - no need to stow it after each use
• You will love this XBOX 360 wireless controller charger

Details:

• Never run out of battery power when you are about to score the winning point

• Recharge the battery pack by using USB connection. Best choice for you. It will give you much convenience

Using Directions:

• Insert the USB plug into the USB port on XBOX360 console, computer or DC 5V power adapter for power
• Check the product's red and green indicator lights in proper order and then turned off shows that the charging circuit is normal
• Put the battery pack into the charger, indicator lights red, it shows that it is in charging state
• The charging time is about 3-5 hours according to the capacity of the battery pack
• When the battery pack is fully charged, the LED indicator ligt turns green
• When the battery pack is bot fully powered, it will recharge automatically and when it is fully charged, it can power off automatically
• If the battery pack has been overused or has not been used for a long time, it needs about 10-30 minutes(the charger indicator light will not shine) to wake up the batteries. You can charge the battery after it been waked up, and the LED indicator lights will be red

Instructions on How to Recharge a Wireless XBox 360 Controller

The Xbox 360 has numerous wireless accessories, including wireless controllers with a reliable range of up to 30 feet from the console. The controller also has two battery options: two AA batteries or a rechargeable battery pack. The rechargeable battery pack, sold separately, also has two different recharge options with a Play and Charge Kit, which plugs directly into the console, or a Quick Charge Kit, which plugs into a wall outlet.

• Play and Charge Kit
• Insert your rechargeable battery pack into your wireless Xbox 360 controller. The battery bay is located on the bottom of the controller. Slide the battery pack in then push it down until it snaps into place.
• Connect the controller plug-in of your Play and Charge cable into the port on the top of your controller.
• Plug the other end of your Play and Charge cable into a USB controller port on your console.
• Turn on the console. The wireless battery pack will recharge while your Xbox 360 is turned on and connected via Play and Charge cable to the controller. The battery is fully charged when the light on the charger turns from red to green.
• Quick Charge Kit
• Remove the battery pack from the wireless controller by pressing the eject button and pulling it out.
• Insert the battery pack into the Quick Charge Kit by sliding it into one of the two charging slots then pushing it down.
• Plug the Quick Charge Kit's power cable into a wall outlet. The battery is fully charged when the light on the charger turns from red to green.

How to Charge a 360 Wireless Battery？

The Xbox 360 console uses wireless game controllers that are powered by batteries. The Xbox 360 play and charge kit consists of an Xbox 360 rechargeable battery pack and charge cable. The cable is used to charge the wireless battery pack. The Xbox 360 controller can be used while the battery pack is charging. However, using the controller while charging will decrease the charging speed of the battery pack.

• Insert the end of the charge cable into the USB slot on the front the Xbox 360 console. Only the correct end of the charge cable from the play and charge kit will fit into the USB slot.
• Insert the other end of the charge cable into the port on the bottom of the Xbox 360 controller. This unit needs to be the controller with the Xbox 360 rechargeable battery pack inserted into it. The play and charge kit cannot recharge the standard controller battery pack that contains two AA batteries.
• Turn on the Xbox 360 console. The light on the end of the charge cable connected to the controller will turn red.
• Wait for the light on the charge cable to turn green. This light indicates the battery pack is fully charged. You can use the controller to play Xbox 360 games while you wait for it to finish charging.

How to Make a Turbo Charger for a Controller for an Xbox

If you've ever played a shooting game on your Xbox 360 chances are you've probably wanted to modify the trigger in order to fire your weapon more easily. There is a way to open up your controller and rig the trigger button so that it doesn't need to be completely depressed in order to fire. Once this modification is complete, you can turbo fire when the trigger is pulled. The best part is that the whole process only takes less than a few minutes.

• Flip your Xbox controller over and remove the six exposed screws on the back of the controller.
• Remove the Xbox label sticker located in the center of the back of the controller to expose a seventh screw. Remove this screw.
• Separate the back half of the controller from the front half and set the back half aside. Then locate the right trigger button in the top of the controller housing.
• Stick the end of a paperclip in the small hole located just under the right trigger. Tape the paperclip to secure it to the trigger.
• Replace the back half of the controller and the screws. The trigger will now be modified for turbo use.

Package Included:

• 1 x Charger
• 1 x 110~240V EN Plug Charge Cable