Gas Smoke Detectors GSM Home Burglar Alarm System

Specifications:

Home GSM Alarm System Control unit:

• Static current: 20mA
• Power: 9V-12V DC
• Working temperature: -20 to +85 Degree C
• GSM: 850/900/1800/1900MHz band
• Receiving code: ASK
• Frequence: 315/433/868/915MHZ
• Wireless distance: 100 M
• Wireless detectors: 16
• Wire detectors: 3

Outer Alarm Siren:

• Volume: 110 dB

Wireless Gap Detector (Door / Window Contact):

• Power Supply: DC12V (inner 12V battery)
• Static Current: <=20 mA
• Transmission Current: <=15mA
• Transmission Frequency: 315/433MHZ0.5MHZ
• Transmission Distance: No obstacle 80m
• Internal Distance: 15 mm

Wireless P.IR Detector:

• Power Supply: DC9V (inner 9V battery)
• Static Current: ≤100 mA
• Transmission Current: ≤20mA
• Transmission Frequency: 315/433MHZ0.5MHZ
• Transmission Distance: No obstacle 80m
• Detective Speed: 0.3 - 3m/s
• Detective Distance: 5 - 12m
• Detective Range: Horizontal 110degree, Vertical 60degree

Remote Control:

• Power Supply: DC12V (inner DC12V battery)
• Transmission Current: <=15mA
• Transmission Frequency: 315/433MHZ0.5MHZ
• Transmission Distance: No obstacle 80m

Wireless Gas Detector :

• Power Source: 220/110V AC
• Sensitivity: 10%LEL
• Power Consumption: 1.7W
• Operating Temperature: -10-50 degree
• Ambient Humidity: less than 95%RH
• Horn Level: 75 Decibels at 10 feet
• Standby Mode: Green LED on
• Alarm Mode: Red LED flashes and an acoustic alarm
• Type of gas sensed: Natural gas,town gas,carbon monoxide,LPG

Hot wire type sensor:

• Detect all sorts of combustible gases,LPG and LNG includecity gas
• Ideal for all kitchens
• Self test function
• Durable sensor head
• High Accuracy
• Suitable for the safety valve

Smoke /Fire Detector:

• Power Supply: 9/12V
• Operating Current: 10uA(normal) and 20-50Ma(alarm working)
• Horn Level: 85 Decibels at 10 feet
• Battery life: 1 year min

Features:

• GSM 900/1800/1900 3bands Control Unit
• Voice and message alert
• Send SMS to set alarm ON, OFF, Monitor, Output
• Can program 7 groups of alarm messages
• 3 zones for wired detector
• 16 zones for wireless detector
• Hot wire type sensor Wireless Gas Detector
• Ceiling or wall mounting Smoke /Fire Detector
• Easily set ON or OFF for every wired or wireless detector
• This best home alarm system is ideal for users who already have a wired sensors network installed, and would like to upgrade their wired alarm system with calling function and wireless features
• This wireless home alarm security system offers an efficient and convenient way to protect your home/office
• Convenient operation by remote control  
• Simple accessory expansion by automatic recoding
• Late-night mute remote control
• Remote control realizes detection by areas
• On-site high-loudness deterring alarm
• Alarming detection area cue tone for remote monitoring by Wireless Burglar Alarm System 
• Digital high-fidelity voice message recording, automatic replaying
• E2PROM information protection, power cut won't cause damages to data
• Automatic switch between AC and DC ensures uninterrupted operation of the system
• Expandable RF relay module enables the activation of other RF accessories after alarming
• This wireless burglar alarm system is compatible with computerized community alarm processing center, smart community alarming network may be established
• Timing arm/disarm by remote control
• To achieve "full arm", "part arm", "timing switch on/off "and " emergent calling" by quick button on the panel with this Wireless Burglar Alarm System
• SMS inform if external power failure or recovery

Details:

• This wireless burglar alarm system can arm, disarm, monitoring, and take photos remotely by phone or SMS commands, includes all the things you need

• The security fire alarm system contains siren, door gap detector and remote control
• In intrusion and emergency, the fire alarm system will alarm quickly through loud sound and light flashing

• The smoke heat detector provide a visual trouble indication if they drift out of sensitivity range or fail internal diagnostics
• The smoke heat detector is designed to reduce false alarms from dust, insects, RFI and external light
• The combustible gas detector adopts advanced gas-sensitive semiconductor sensor to ensure high stability and long life

• Control panel automatically dials the alarm center, user's cell phone,immobile telephone with voice announcement as soon as the system alarms

How to Install Wireless Door Sensor:

Your home security wireless door sensors are important detection points - 75% of all break-ins occur through a door. Use common sense when installing home security wireless sensors - remember that the objective is to make sure that the sensor and magnet are located within 3/8" of each other. (See Figure 1) Be sure the home security wireless sensor and magnet are not obstructing the opening of the door

• Hold the home security wireless sensor near the top of the door, close to the opening edge of the door (not the hinge side). This is the mounting location for the sensor. Hold the magnet on the doorframe next to the sensor. The alignment marks must match up. (See Figure 2) The sensor and magnet must be within 3/8 of an inch from each other in order to operate properly. This is the mounting location for the magnet
• Now that you have determined the proper location you can attach the home security wireless sensor and magnet. Thoroughly clean the mounting location with a clean, dry cloth. Remove the protective backing off the 3M strip on the sensor. Make sure the home security wireless sensor is straight and is close to the edge of the door. Attach the sensor to the door. Press firmly and hold in place for 30 seconds
• Now remove the protective backing off the 3M strip on the magnet. Make sure the alignment marks are facing each other. Attach the magnet on the doorframe next to the sensor. Press firmly and hold in place for 30 seconds. When the magnet is moved more than 1/2 inch from the sensor, the alarm will be activated if the home security wireless system is armed

About Wireless Home Security Alarm Systems:

Home security systems are steadily moving towards a more wireless solution. With news stories about children abducted from home, and increases in burglaries and home invasions, security is very important for households. Families have an innate desire to protect themselves and their belongings from intruders. Home security systems are being installed to act as the eyes and ears of families while they are away from home or asleep at night. Not only a valid defense against theft, wireless home security systems fight against fires and aids in other medical related emergencies

• Benefits: One of the greatest benefits to using a wireless home security system is the easy and quick installation. For most wireless systems, you only need to connect the device to an existing phone line, and it is ready to go. Another benefit is the cost; wireless systems costs are considerably cheaper than the other types of home security systems. This is largely due to the reduced need for the installer to deal with structural issues in your dwelling

• Features: The most well-known features of wireless home security systems are burglary, fire and medical monitoring and alarms. Other types of alarms that are associated with the device are emergency, gas and flood warnings. Other features includes integral keypad, hand-held transmitters, several different arming modes, choice of alarm types, programmable power supply, event logs and fixed frequency receiver types

• Other Uses: Wireless home security systems are not just attractive because of their easy installation practices. Homeowners like them because of their other uses as well. One use is the ability to contact the fire department if a fire breaks out while no one is at home. For other systems, to have this feature included will cost more than it does with wireless systems. With some of the wired systems out there, the fire alarm option can cost up to $1000 for installation and $20 a month in monitoring. For wireless systems, there is no or little installation cost, and monitoring isn't required. Wireless alarm systems can also be connected to lights and appliances in the home. Would-be burglars can be deterred when lights and appliances are turned on and off at random times. This gives the appearance that someone is home even when no one is

• Wireless Sensors: For the wireless alarm system to work, several wireless sensors are placed around the home. Burglary sensors are attached to doors and windows. When a door or window is opened while the alarm is engaged, the wireless sensor sends a signal to the main device. The device then blasts a siren and/or contacts the police, depending on the programming settings. In case of a fire, the sensor picks up on smoke in the environment, much like a smoke detector. A signal is sent to the system, and the fire department is notified through the connected phone line if the alarm isn't disengaged within a set time frame

Package Include:

• 1 x Alarm system (control unit)
• 1 x Wireless PIR detector
• 1 x Wireless door (gap) sensor
• 2 x Remote controller
• 1 x Antenna
• 1 x Mini wired siren 110dB/0.3m
• 1 x Power supply with back-up
• 1 x Installation/user manual
• 1 x Gas Detector
• 1 x Smoke /fire detector