Voltage: 220V Power : 2000W
Temperature : 50 'C -590 ’C temperature digital control
Steam flow: 250 l -500 l / min
Function: cold , hot air , electronic flow control , thermostat , thermostats , digital CNC Heat Gun
Carton size : 40.5* 28.5*54.5CM
Heat Gun Use:
1 , the paint can be removed or painted over , with the hot air nozzle and scraping with the use of better ;
2 , removal of self-adhesive stickers, old wallpaper and decorative ;
3 , lifting too tight or rusted nuts and metal screws ;
4 , dissolved freezing pipes, frozen door locks or padlocks , etc. ( Do not attempt to use the plastic tube ) ;
5 , in dealing with grease or replace the old mill before , can first soften ;
6, for the refrigerator defrost ;
7 , PVC shrinkable packaging film as a protective layer ;
8 , can be used in a sleigh wax or wax ;
9, can be connected to the metal with a polyethylene shrink material ;
10 , softened welded material .
Hot air gun for the hot gas outlet , check the manual before using the precautions used with caution.
1 , when you start using a heat gun , if you want to leave , regardless of the length of time you first turn it off and unplug the power cord .
2 , using a heat gun , try to use in a dry place , if have to use in damp places , please try to choose a dry place to stand , and wear protective clothing insulation , but the heat inside the gun ban into bathrooms .
3 , do not directly touch the front heat pipes, heat gun or hair dryer when the general use , as this may cause serious accidents, because hot air gun nozzle temperatures up to 600 degrees .
4 , because the hot air gun temperature is very high , if you want the heating surface is easy to use on damaged goods , please adjust the heating temperature and the appropriate attention before the hot air gun nozzle and processing of goods in the distance.
5 , do not store toxic solvents in small space using a heat gun , to avoid accidents .
6 , when you want to store heat gun when you can use your hands in a hot air gun touch and feel the heat gun before the tube has cooled only when retention.
7 , please do not use any objects blocking the entrances heat gun , that would reduce the gentle flow, so that the internal temperature rise heat gun , to avoid accidents and damage to the hot air gun .
8 , please be sure to remember not to repair or disassembly hot air gun