Customers Also Bought
- Model: D10S Diving Light
- Bulb: Cree XM-L U2 (Max 860 lumens)
- Color temperature: 6500k.
- Output Function: High> Off
- Runtime: 70 min.
- Reflector: Glossy Aluminum reflector
- Body material: Durable aircraft-grade aluminum.
- Angle of light beam 8°
- Surface treatment: Premium Type III hard-anodizing.
- Color: Black
- Battery: 18650 Li- ion battery *1.
- With battery over-discharging protection, polarity reversing protection
- Operation voltage: 3.0V to 4.5V.
- Low voltage alarm: flash 3 times when the voltage is below 3V and flash 3 times again in 5 second, then change to 10% brightness till switch off when the voltage is below 2.8V.
- Waterproof: 100 meters underwater
- Dimensions: 145(length)*24(dia. of end)*29mm (dia. of head).
- Weight: 115grams (without battery); 165 grams (with battery)
- Underwater Weight: 135 grams (with battery)
- Impact resistance: 1.5M.
•1. Separate the light head and body by turning counter-clockwise.
•2. Remove used batteries and replace with fresh batteries as shown by the polarity stickers.
•3. Mount the light head on the body by turning clockwise.
•1. Plug the charger in the wall power socket, the indicator light is green in the free-load status.
•2. Put the battery in the slot of the charger.
•3. The indicator light is red if the battery is not fully charged; it will turn green after fully charged.
•4. Take out the fully charged battery and use them in the diving light.
Push the switch forward to turn the light on.
Push the switch forward again to turn the light off.
SCUBA DIVING APPLICATION
Check closely for cuts, scratches, or an otherwise damaged o-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the o-ring sealing surfaces.
KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.
If the light is not to be used for some time, remove the batteries to prevent possible leakage or corrosion. Please remove the batteries during transportation to prevent it from misoperation.
WARRANTY RETURN POLICY
Please contact your local distributor or retailer for information on how to handle your warranty items.
- 1 x D10S diving light
- 1 x Diving hand rope
- 1 x Product manual warranty card
- 2 x Standby waterproof circle
- 1 x Moistureproof beads
If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Before that, please contact our Live Support to inform that.
In that case we will refund you the payment excluding actual shipping fees already incurred.
If the item is defective, please contact DinoDirect Live Support and send an email to us at firstname.lastname@example.org attached an image or video file clearly showing the defect of the product. And we will give you a response within 24 hours whether we will resend the item or refund the payment to you for compensation.
For customization, please consider carefully before ordering.Because we do not accept return and replacement.
|Unit Price||USD$ 34.07||USD$ 33.54||USD$ 33.01||USD$ 32.31|
|Enter Wholesale Channel>>|
• If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
• If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Please contact our Live Support to inform that.
• Please contact Live Chat or click here to learn more return policy.