31mm White Light SMD Auto Dome LED Lamp DC 12V

Specifications:

• This LED dome light is a flexible light of auto LED lamp
• LED dome light is made of super bright LED
• The LED dome light is durable and can be set easily to fit the place you like without damage 
• You can fix the auto light bulb on the car underbody or any other place you like
• The auto lamp is also perfect for decorating your car
• Voltage: 12V
• LED Color: White
• LED Number: 6

Details:

• This is a SMD 12LED White Light SMD Auto Dome LED Lamp

• This LED Auto White Lamp comes with 12 LED bulbs and give you more brilliant light

• The durable back details of the light that is low power consumption, long life-span

• The exquisite details of the auto lamp ensure long time using

• You can image the size of the auto LED lights according to the coin

How to Replace a License Plate Bulb:

Without proper lighting, police officers may not be able to see your license plate. Many states require that your license plate is visible at night. For this reason, vehicles are equipped with license-plate bulbs. These bulbs are usually mounted above the plate, although in some cases they may be mounted to the side of the plate. A typical license plate bulb is a standard wedge-based bulb. A replacement is usually less than $5, but the exact bulb specification depends on your vehicle. Replacing a license-plate bulb does not require automotive expertise or skill

Instructions

• Purchase a new license-plate bulb. Check your owner's manual to determine the specified bulb. You can also look up the bulb number online (see Resources). Additionally, you can contact an auto-parts store or a dealer, provide them with information on your vehicle, and find out the correct replacement bulb
• Examine the license-plate bulb lens to determine what type of tool you'll need, and then acquire the appropriate tool. In most cases, you'll need either a Phillips or a flat-head screwdriver. In other cases, you might need a wrench. Also, look at the license plate itself; determine what type of tool you'll need to remove the bolts or screws from it
• Remove the bolts or screws from the license plate. Pull the license plate off to create more working room
• Remove the bolts or screws from the license-plate bulb lens. Grasp the lens and pull it off. On the back, you'll find the license-plate bulb. Pull the bulb straight out of its socket
• Wrap the new bulb in a paper towel, or wear gloves to keep from touching the glass. Insert the replacement bulb into the socket. Place the license-plate bulb lens back into place. Tighten the screws or bolts
• Reposition the license plate. Re-attach it by tightening the bolts or screws

How to Change a License Plate Light Bulb:

Lights illuminate your plate number and car at night. Along with taillights and brake lights, license plate light bulbs help other cars keep track of you while driving. They're an important component of vehicle safety. When you want to upgrade your license plate light bulb to a high-powered LED light or simply replace a burnt-out bulb, you'll need to know how to get at the license plate light bulb housing. Changing the light bulb light should take one hour or less, depending on your comfort level with DIY automotive repair

Instructions

• Review your car's manual before beginning to find out how to change the license plate bulb for your exact model. While the basic procedure remains the same across the board, there are model-specific differences to keep in mind. The manual will inform you what size light bulb you need to buy
• Open the trunk of your car. Look at the inside panel of the trunk door (this will be above your head) to find several screws. Remove these to expose the area where your license plate light is
• Remove the pins holding your trunk lining in place by prying a flat head screwdriver underneath the lip of the pin. The number of pins varies by your model car
• Pull away the trunk lining. Look for two tubes connecting to light brackets. If you're not sure whether you're looking at the right thing, lower the trunk and see if the tubes match up with the license plate light on the outside of your car. Pull the tubes off to disconnect the power source and expose the light housing so you can safely change the light
• Turn the light housing clockwise to loosen it then pull it out. There will be one housing for each light.
• Grasp the light bulb in the housing and pull up to remove it. Remove both light bulbs
• Take the replacement bulbs out of their packaging. Working one at a time, push the new light bulb into the light housing to secure it
• Insert the housing back in place and turn it counter-clockwise until it snaps into place. Replace both housing elements
• Re-attach the light tubes. They will click into place
• Fit the trunk liner back in place. Hold it in place with one hand and slide the pins back to secure the trunk liner cover. Once you've got all the pins back in place, your work is complete

Package Included:

• 2 x Auto Dome LED Lamps