Customers Also Bought
- Holding Force: 50kg(100Lbs)
- Voltage: 12/24VDC+10%
- Current Draw: 12V/100mA 24V/50mA
- Suitable for: All Kind of the Single & Double Smokeproof Door
- Surface Temp: ≤+20℃
- Operating Temp: -10～+55℃(14-131F)
- Suitable Humidity: 0~90%(non-comdensing)
- Finishes for Shell: High Temperature Paint and Environmental Protection Zinc
- Finishes for Armature: Zinc
- Dimensions: 80 x 80 x 40mm/3.15 x 3.15 x 1.57in(L x W x H)
- Collinear load test 50kg, 100pounds
- Dual voltage 12 or 24 VDC(optional)
- The standad voltage is 12VDC when finished
- MOV provides reverse current protection
- Low power, environmental protection
- Anti-residual magneism designed
- Professional design, dual insulative housing
- Shunt and defend the cigarette door automatically during the fire alarm
- CE certificate by european union
- Low power, environmental protection
How to Install a Magnetic Door Holder
- Screw the magnetic part of the holder onto the inside trim of a cabinet or onto the door jamb of a light screen door that you wish to keep closed. The magnet should be flush with the outer edge of the cabinet or jamb. Screw the magnetic part of the holder to the outside of a door near the bottom or outside edge if you wish to use it to keep the door open
- Put the metal plate onto the magnet, and align it so that it is flush with the magnetic holder on all sides. Close the cabinet or screen door, and mark the position of the plate on the door with a pencil. Open the door, align the plate with the pencil marks on the door and screw it in with a screwdriver. Close the door, and test the holder
- Open the door fully if the holder is meant to keep the door open. Set the metal ball or plate on the magnet, and align it with a surface to which it can be attached, such as a floor, fence board or wall. Screw it into the surface with the screws provided. Open the door to ensure that the holder works
Tips & Warnings
- If the wood is very hard, it's a good idea to use a drill to make pilot holes for the screws. Use a drill bit that is quite a bit narrower than the screw
- Don't attach floor mount door holders where they will be a tripping hazard
- Attach wall mount holders to studs in the wall or to the bottom plate if possible. If you have to use wall anchors, metal molly bolts are preferable to plastic anchors, especially for heavy doors
- 1 x Set of Basic Wall Mount Door Holder for Wood Door and Metal Door YD-601
If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Before that, please contact our Live Support to inform that.
In that case we will refund you the payment excluding actual shipping fees already incurred.
If the item is defective, please contact DinoDirect Live Support and send an email to us at email@example.com attached an image or video file clearly showing the defect of the product. And we will give you a response within 24 hours whether we will resend the item or refund the payment to you for compensation.
For customization, please consider carefully before ordering.Because we do not accept return and replacement.
|Unit Price||USD$ 21.48||USD$ 20.46||USD$ 19.44||USD$ 18.08||USD$ 18.08|
|Enter Wholesale Channel>>|
• If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
• If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Please contact our Live Support to inform that.
• Please contact Live Chat or click here to learn more return policy.