Li-Ion Ni-CD Ni-MH 4-Channel Battery Charger

Specifications:

• Input Voltage: AC 110~220V 50/60HZ or DC 12V
• Input Power: 10W
• Output Voltage: 4.2V x 1%/1.4V x 1%
• Output Current: 500mA x 4/1000mA x 2
• Compatible with: Li-ion26650, 22650, 18650, 17670, 18490, 17500, 17335, 16340(RCR123), 14500, 10440 & Ni-MH/Ni-CD: AA, AAA, A, SC, C
• Color: Black
• Size: 13.9 x 9.6 x 3.6cm/5.5 x 3.9 x 1.4in(L x W x H)

Features:

• This Li-Ion Battery Charger can simultaneously charge four batteries
• Each battery slot of this Li-Ion Battery Charger is charged and monitored independently
• This Portable Battery Charger features constant current, constant charge voltage and trickle charge modes
• The Li-Ion Battery Charger has an exquisite workmanship
• Automatically stops charging when complete
• Do not include battery and the power cord
• Exquisite design, the Li-Ion Battery charger made of high quality material

Details:

• This Li-Ion 4-Channel Portable Battery Charger features three charge modes

• This Li-Ion Battery Charger is easy to read Tri-Color LED shows battery charge progress

• This LED Portable Battery Charger is easy to use and it can be used for a long time

• The Cheap Battery Charger can charge for four batteries at the same time

• It can charge nearly all types of batteries which provide you lot of convenience

How to Test Rechargeable Battery Chargers:

• Open the battery compartment of the battery-operated rechargeable device. Many devices have battery compartment covers that slide off or unhinge 
• Insert the rechargeable batteries into the device. Close the battery compartment. Power on the device and use it until the batteries are drained. The device may suddenly shut off or notify you that the batteries are low 
• Open the battery compartment and remove the batteries. Insert the drained batteries into the battery charger 
• Plug the battery charger into a wall outlet. Look for a status light on the charger that will light up when powered. If the light does not come on, try another wall outlet. Note that some chargers may lack a status light or the charger may still work even if the light malfunctions 
• Leave the charger plugged in overnight or for a few hours. Unplug the charger. Remove the batteries and insert them into a battery-operated device. Attempt to use the device. If the device functions, the battery charger successfully charged the batteries

How to Charge Multiple Batteries

• Using a multiple battery charger to charge your batteries ensures you always have replacement batteries ready to use when one unexpectedly dies. Charging multiple batteries is no different to charging a single battery, but you need to make sure you use the correct voltage battery charger
• Open the cover of the multiple battery charger. Either unclip it using your fingers, or if it uses a screw to hold it in place then use a screwdriver and remove the screw then lift off the cover
• Look at the printed diagram in the battery charger. It tells you the way you need to place the multiple batteries inside so they charge correctly
• Place your batteries into the charger. Place the raised knob on the top of the battery onto the positive terminal and the flat base of the battery onto the negative terminal. The terminals on the batteries and charger are labeled "+" for positive and "-" for negative
• Replace the battery charger cover. Either clip it in place using your fingers or insert the screw and tighten using a screwdriver
• Insert the plug on the end of the battery charger into the plug socket. Turn on the charger and let your multiple batteries charge until full then turn off the charger. Remove the batteries when you need to use them

Package Included:

• 1 x Battery Charger