Specifications:

• Support of all ECU use cases in engineering, test, production and after sales
• Specification of ECU's diagnostic data
• Reading and clearing error memory
• FLASH data uploading and downloading
• Reading measurement value
• Input/output control
• Calibration of single ECU variables
• Coding of ECU variables
• CAN (controller Area Network) bus mode emulation
• Integrated solutions for on-board/off-board
• Fast and simple configuration of GUI and communication data instead of programming
• Customer specific protocols supported
• Long term application by supporting widespread ASAM standards
• Language is English and German

INPA Models Covered:

• Series E87
• Series E30 E36 E46 E90
• Series E34 E39 E60 E61
• Series E63 E64
• Series E32 E38 E65 E66
• Series E31 E52
• Mini R50 R52 R53
• X series E53 E83
• Rolls Royce
• Z series E85 E52.

Notice of Using INPA:

• Before using this equipment, keep the battery of notebook fully charged to avoid battery broken. Don't charge the
• battery while diagnosing. Before charging, discharge the battery. You may knock down the battery and connect the
• power line during long time diagnosing. To make sure the battery life.
• While testing, to make sure the diagnostic lines well connected.
• Be sure to start diagnosing after all icons on bottom right of screen displayed regularly.
• After finished diagnosing, back the screen to the main interface, then shut down the key and pull out the connector.
• Don't cut the power or connector during test.
• Don't touch the high temperature components in carriage during test

Details:

• Why not choose this convenient and portable OBD2

How to Diagnose Car Problems With an OBD2:

• Start the ignition and watch the components on the dashboard console. The light for "Check Engine" or "Service Engine Soon" should flash briefly. This indicates that the OBD2 is present and ready to diagnose problems that may exist
• Check the dashboard console as you drive. If there are any problems, the "Check Engine" or "Service Engine Soon" light will come on and stay on. The OBD2 will alert you to problems ranging from a loose or missing gas cap to an engine misfire
• Look for blinking lights on your dashboard console. Blinking lights indicate that there is a serious problem occurring with the engine of the vehicle. It will be safer to limit your driving until this problem has been resolved
• Use a personal OBD2 code reader to scan for problems (see Resources below). Attach the reader to your car's 16-pin port, which is usually located under the steering wheel. The reader will display the problem codes generated by your car's computer, as well as the definition of the codes
• Take your car to an auto technician if you are unable to discover the source of the problem on your own. The auto technician will use a professional OBD2 reader for a more detailed scan of your car. The mechanic will use the codes as a starting point in determining the true cause of the problem.
• Take note if the light on the console goes out before you can take the car in for service. This indicates that the problem has been resolved

Package Included: 

• 1 x BMW INPA Car Diagnostic Tool