Customers Also Bought
Feature:Intelligent voice navigationIncoming call voice promptBluetooth version: V3.0+EDRSupported profiles: HFP, A2DP, AVRCPSupport 3.5 mm stereo audio inputOperation Range: 10 metersPlay time: up to 10 hoursTalk time: 12 hoursstandby time: 200 hoursCharging voltage: DC5V/500mACharging port: Micro USBCharging time: 2.5 hoursSpeaker diameter: 30mmBuilt-in microphone support digital signal processing echo cancellation technologyBattery capacity display, support iPhone , MI and all Android mobile phone(need to install app application software)Operation specification:1 Charging headphone(connect to PC or power adapter through USB cable)Charging: please connect headphone to PC through attached USB cable(or optional USB charger). Red indicator is on while charge. Fully charge may take up to 2hours and a half. if the power is pretty low. You can also talk or listen to music when charge. Disconnect the headphone from charger when charging completed, then unplug the charger from AC outlet.Battery status: you can read battery status directly on mobile phone screen by connecting headphone to phones like iPhone and MI. But for other Android mobile phone, app application software must be installed before reading. Red indicator flashes and alarm sounds to report the low battery.Note: hold the charger when unplugging it from AC outlet instead of pulling power line.2 ON/OFF:ON: turn the switch key to ON position, you will hear voice prompt “Bluetooth waiting for connection” with blue and red lights flashing alternately. At first, it will try to connect the previously connected and HFP supported Bluetooth enabled device. When connecting to any available device, the blue indicator will flash slowly. If no any device paired with it before, then the headphone will enter into pairing mode automatically.OFF: turn the switch key to OFF position, you will hear voice prompt “OFF”. In the meantime, the blue and red indicator will be on briefly.Note: headphone will be off automatically within 10 minutes without connecting to any device.3 Connecting to Bluetooth enabled device:A Bluetooth pairing for the first time1)Turn on headphone: turn the switch key to ON position. The headphone enters into pairing mode when blue and red light indicator flash alternately.2)Turn on targeted pairing device(such as MP3,mobile phone, smart phone or tablet PC) to activate their Bluetooth.3) Choose and confirm BQ-618 from your Bluetooth device menu. If security code, PIN or passcode required, please input 0000.4) Bluetooth connection is successful when blue indicator flashes slowly.B Pair with other Bluetooth enabled device1)Cut off Bluetooth connection of existing device: turn the switch key to OFF position to power off headphone and close Bluetooth function of your paired device.2)Turn on headphone. It enters into pairing mode when blue and red light indicator flash alternately.3)Turn on targeted pairing device(such as MP3,mobile phone, smart phone or tablet PC) to activate their Bluetooth.4) Choose and confirm BQ-618 from your Bluetooth device menu. If security code, PIN or passcode required, please input 0000.5) Bluetooth connection is successful when blue indicator flashes slowly.Note: you may need to connect certain device separately after pairing. The blue indicator of headphone will flash slowly when it is connected to your device successfully. The headphone will automatically search and connect to previously connected Bluetooth device after restart. Multi-devices pairing is allowed for headphone, but the actual use is only available for one device at a time.4 Wearing headphone:Put on headphone to make sure the speaker sponge pad over your ear in a most suitable position, with L logo on your left and R on your right.5 Adjust volume:Connect headphone to Bluetooth enabled device successfully:> + : long press to increase volume| < :long press to reduce volumeNote: headphone alarm will sound when volume reaches maximum or minimum. You can also adjust volume on A2DP paired device(if the connected device support this profile).6 Mobile phones calls:Connect headphone to smartphone1)Answer incoming call: press multifunction key gently(no more than 1 second)2)Reject call: hold the multifunction key for 3 seconds3)End call: press multifunction key gently(no more than 1 second)4) Press multifunction key twice rapidly to redial(if mobile devices support headphone redial function)5) Long press multifunction key can switch the call to mobile phone. While, press the multifunction key twice during calls will turn mute. The headphone will automatically broadcast caller ID for an incoming call with red and blue indicator flashing alternately.7 Enjoy music:Please connect headphone to A2DP supported compatible music player. The music playback function depend on your player. Your music player will pause if you answer or dial calls when listening to music until calls end. Press multifunction key gently(no more than 1 second) to pause or resume play. For next song, please press |< once, previous song, press >+ twice.8 AUX play:Make sure the headphone is turned off. One end of 3.5mm audio cable connect to headphone audio interface, while the other end connect to multi-media players.
- Unit Type:1piece
- Package Weight:0.199kg (0.44lb.)
- Package Size:19cm x 16cm x 5cm (7.48in x 6.30in x 1.97in)
If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Before that, please contact our Live Support to inform that.
In that case we will refund you the payment excluding actual shipping fees already incurred.
If the item is defective, please contact DinoDirect Live Support and send an email to us at firstname.lastname@example.org attached an image or video file clearly showing the defect of the product. And we will give you a response within 24 hours whether we will resend the item or refund the payment to you for compensation.
For customization, please consider carefully before ordering.Because we do not accept return and replacement.
|Unit Price||USD$ 10.71||USD$ 10.39||USD$ 10.07||USD$ 9.65|
|Enter Wholesale Channel>>|
• If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
• If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Please contact our Live Support to inform that.
• Please contact Live Chat or click here to learn more return policy.