Customers Also Bought
- Kv: 890rmp/v
- Poweer : 550W
- Wire Winds: 10
- Resistance: 40ohm
- Idle Current: 2.6A
- ESC: 45A
- Cells Ni-Cd/Ni-MH: 9-21
- Cells Li-Po: 3-7
- Prop: 13 x 6/ 13 x 8/ 14 x 8
- Motor Size: 42 x 40mm /1.65 x 1.57in (Dia. x L)
- Shaft: 5mm / 0.2in(Dia.)
- This Motor for RC Helicopter comes to electric motor performance in high-level
- Running is so fast for this Motor for RC Helicopter
- Higher speed and longer run times for your heli with this Motor for RC Helicopter
- High quality and working well with the help of this Outrunner Brushless Motor
- It is made of durable and high quality, which is durable and lasting with long time use
- It is flight without limits. It is very easy to install, you can just install it onto your RC helicopter all by yourself
Size in Detail:
How to Make Homemade RC Helicopters
Flying RC helicopter is really very exhilarating. Their versatility gives a RC pilot a complete access to the three-dimensional space in such a way that no other machines can! I have played RC helicopter for more than one year but still find that I have just learnt a few tricks that it can perform.
There are generally two micro-helicopters ( indoor ) in the RC market. I have already planned to buy one of them as they can fly inside the living room and even take off on ours hand. Unlike those operated by gas, these electric helicopters are very clean and give out no terrible noise at all. In one nightfall, I visited a web site, which is about how to make a hand made RC helicopter. I was totally impressed and started designing my own helicopter. Here is my helicopter:
- The plan of the helicopter had finally been completed. It is not very well drew. The current plan available is only for the fixed pitch design. Please click the above photo for the plan.
- Making the main body
- The material that I use to make the main body of the helicopter would make you feel surprise. It is the circuit board ( after removing the copper layer ) that purchased from electronic shops. It is made of a kind of fiber which gives abnormal strength to it
- Would you think it is just too simple? Well, it is really a very simple design as the tail rotor is powered by a separate motor. This eliminates the needs not to construct a complicated power transfer unit from the main motor to the tail. The tail boom is simply fixed on the main body by 2 screws together with some epoxy adhesive
- Make sure that the aluminum ball placed in the rod end can be moved freely. 2 holes were drilled on the plastic spacer in order to house two screws that used to hold the ball linkage
- In my design, the swashplate is fixed on the main shaft. This is simply done by applying some glue between the aluminum ball and the shaft
- My instructions are too confusing? Here is my draft of the swashplate which might help you. I still find that my design is a little bit too complex. If you have a better design, please let me know!
- For the rotor head, I choose the same material as the main body - the circuit board. First of all, I have to claim that the rotor head must be sturdy enough to withstand any vibration or it could be very dangerous.The control system I used here is the Hiller system. In this simple control system, the cyclic controls are transmitted from the servos to the flybar only and the main blade cyclic pitch is controlled by the flybar tilt only
- There is a metal bar ironed perpendicularly to the flybar. It holds the metal ball of the ball link in position. Here is how the ball link is made
- The rob ends are shortened and a metal bar is used to connected them together. the metal bar should be inserted deep into the rob ends and fixed with epoxy adhesive
- In addition to the ball link, an "H" shaped anti-rotating unit is a must for the control system. It helps to keep the ball link in position. The materials needed are showed in the above photo.(19)
- In order to stop the lower part of the swashplate from moving, an anti-rotation unit is also needed here. It is simple a small board with two pins inserted on it
- Here is the measurement of the tail blade. It can be shaped easily from a 2mm thick balsa. the tail blades make an angle of ~9°on the blade holder
- The photo shows all the things that the tail part consists. The two balsa blades are hold by a hardwood holder which helps to give a fixed tail pitch. It is then secured on the gearwheel by 2 screws. The motor is simply glued on the tail boom by epoxy adhesive and the tail shaft holding tube with the same way on the motor.The tail blade is made of balsa. They are covered with heat shrink tube in order to reduce the friction between the blade and the air.The pitch and the weight of the two blades must be exactly the same. Tests must be performed to ensure that no vibration occur
- Only two servos are used in my design. One is for the elevator and the other one is for aileron. In my design, the aileron servo is installed between the motor and the main shift holding tube. In this way, the tube has made use of the sturdy plastic case of the servo as one of its supporting medium
- This arrangement gives extra strength to the main shift holding tube as one side of the servo is glued to the motor while the other side is glued to the tube. However, the mobility of the servo as well as the motor is lost
- In a fixed pitch design, only 2 servos are needed.A computerized Tx is needed as the the tail control must be mixed with the throttle control. For a Piccolo micro helicopter, this task is performed by the Piccoboard. For my design, this is done by the function "Revo-Mixing" in the Tx
- now you can play with your home made heli.... enjoy it
- 1 x C4240 - 890KV Brushless Motor
If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Before that, please contact our Live Support to inform that.
In that case we will refund you the payment excluding actual shipping fees already incurred.
If the item is defective, please contact DinoDirect Live Support and send an email to us at email@example.com attached an image or video file clearly showing the defect of the product. And we will give you a response within 24 hours whether we will resend the item or refund the payment to you for compensation.
For customization, please consider carefully before ordering.Because we do not accept return and replacement.
|Unit Price||USD$ 25.24||USD$ 24.41||USD$ 23.57||USD$ 22.46|
|Enter Wholesale Channel>>|
DINODIRECT has a team of professional designers, who are all experienced in European and Western design and lead the latest trends in Europe and the United States wedding market design. Our designers are also experienced in customizing dresses; we can do whatever you ask to do on your dresses like Lace and beading. You can tell us your ideas on your dresses and we would like to help you make your ideal wedding dress. We will give you the design in 48 hours with all the unique and charming details.
100% Made to Measure Dresses
DINODIRECT.Produces tailor-made dresses to suit your needs. We ensure that all dresses are 100% handmade. Once you provide the accurate measurement of the details (See our measurement guide) to us, we will immediately start working on your wonderful, unique wedding dress.
DINODIRECT.com’sdresses are made of best material. DINODIRECT hires only the best dressmakers and experienced designers in china, who use the finest production techniques to create your dress.
The Best Price
DINODIRECT.com’s prices are a lot lower than retail prices. With the decades experience in wedding industry, we can offer you all kinds of dresses with the most reasonable prices. Our price varies from US$100-US$800 for some of the highest quality dresses found online.
Speedy Delivery Times
DINODIRECT will ship out your dress as soon as possible. It takes you about 30 days from the day you place your order to the day you receive it.
Q: Are the dresses made by your own factory?
A: DinoDirect has our own factory with over five years’ experience in making dresses.
Q:Is the price on your website real price, why it is much cheaper than market price?
A:Dinodirect manage our business with lower overhead than a retail store or a company. We needn't employ many different departments, and needn't pay the much fees for advertising, renting a store, asking other team for alteration etc. We are the one of largest professional wedding factory in China, and our clients can order dresses from our factory directly. Since we do not have to accommodate for these costs, we can pass the savings onto our customers.
Q: How to make sure the quality?
A:DINODIRECT.com’s dresses are made of best material. DINODIRECT hires only the best dressmakers and experienced designers in china, who use the finest production techniques to create your dress.We ensure that all dresses are 100% handmade.
Q:How do I place my order in this website?
A:You can view the catalog in our website. If you find anything you want to buy just take it to shopping cart and then go check out.
Q:How do I use the search option of your site?
A: You can search by color, by designer, by occasion, by dress type, by price, or by style number. You can search all those categories at once and even sort by price and popularity once you've filtered your dresses.
Q:Can you customize the size of my dress?
A:Absolutely – if our standard sizes don't work for you, we can make you a custom-sized dress for free,When you ordering, you’ll need to check the tab for “Custom size”,then fill in your size. Getting professionally measured is best, but if you want to do it yourself be sure to read our measuring guide first. Avoid common mistakes by doing the following:
1.Ask someone else to measure for you
2.Take measurements while wearing undergarments similar to what you’ll wear with the dress
3.Provide a bust measurement from the fullest part of your chest, not your bra size!
Q:Can I order this dress in a different style/fabric/length?
A: Of course you can. You can click" Custom Size" and then leave your request in "Item Remarks". We will make your dress by your request.
PS: Some dresses do not have “Item Remarks” Tag.
Q: If I buy 2 or more dresses at the same time, do I need to pay postage for twice or more?
A: If you order 2 or more dresses including accessories from our website and we can send them together to same address, you just need to pay for postage once.
Q: How will my item (s) be shipped?
A: All shipping information is outlined in our shipping page.
Q: How long is the delivery time?
A: Usually it takes 7-15 days to make wedding dresses and 1-2 days to check your dresses. The shipping time also differs in shipping methods. The fastest shipping - expedited shipping takes 5-6 days for the shipment. The standard shipping takes 5-9 days. The super saver shipping takes 15-20 days for the shipment. The sooner you place an order, the sooner we start preparing your dress. Thank you.
Q: Will my dress exactly match the color I see on your website?
A: There might be a slight difference between the actual dress’s color and what you see in the photo depending on your computer monitor’s display settings.
Q:Can I make changes to my order after I have paid for my order?
A:You can change your order within 48 hours after you have paid your order, by contacting DinoDirect Live Support and send an email to us at firstname.lastname@example.org, if more than 48 hours, we could not change your order any more.
Ensuring your order number is included.
Q: What should I do if the size doesn’t fit me perfectly?
A:If your size fluctuates or you want to modify the dress slightly, we always leave a few inches in the seams so that your local tailor can easily make alterations as needed. Dresses generally have a margin of 1 inches on either side of a seam. Flower detailing, beading or belts/ribbons may limit ability to let a dress out.
Q:How do I upgrade my shipping?
A: Simply respond to your confirmation email with the method you would like to change it to.
Q:How to Preserve my Dress?
A: In order to prevent the dress distorting and yellowing, you can choose professional dust bag to restore.
Q:What should I do if I have forgotten my password or my password does not work?
A: In our register page, please click “forgot my password”, you will receive an email. There will be a link in the email, click that link and reset your password. If you don’t receive the email, please check it again in your spam mail. Please contact with our Customer Service online if you don’t receive it indeed.