HD Vehicle Car Dashboard Recorder Camera DVR

Specifications:

• Remote Control: Supported
• Battery: High-capacity Removable Battery
• Power Interface: 5V 800mA USB
• Interface: USB 2.0
• Current Frequency: 50HZ/60HZ
• Video Format: PAL/NTSC
• Video Output: AV-OUT
• Infrared Night Vision: Supported
• Built-in Sound Equipment: Supported
• Microphone: Supported
• Memory Card: SD
• Photo Format: JPG
• Photograph Mode: 4032 x 3024(12M), 3264 x 2448(8M), 2560 x 1920(5M), 2048 x 1536(3M), 1280 x 960(13.M)
• Recorded Video Format:  AVI
• Recorded Video: 1280 x 720, 720 x 480, 640 x 480, 320 x 240
• Camera Lens: 140 degree A + class, high-resolution and ultra-wide-angle lens
• Color: Black & Red

Features:

• The dashboard car camera DVR can work continuously and will maintain automatically
• Nice user experience are available from this car camera with low consumption
• Camera DVR is a surveillance camera which features on the standard H.264 calculation
• Built-in low-light and high-quality sensor, capable of capturing clear pictures in a variety of occasions
• This wired camera is easy to use in different environments
• Lens of the car camera can be shift 80 degrees up and down

Details:

• Camera DVR is a HD video recorder features on the standard H.264 calculation

• Built-in low-light and high-quality sensor, capable of capturing clear pictures in a variety of occasions

• This car camera comes with clean image and portable design 

• The camera is standard for sweeping use; high quality ensures operational stability

• Clean and tidy design of this DV looks elegant and attractive

How to Install Car Security Systems:

• Go to the local market where you get all the accessories for your car and look for car alarms. Car security alarms usually include parts like siren, motion sensors, universal lock, glass-break sensors, auto lock, etc
• Gather necessary materials like drill, screws and screwdrivers, duct tape, solder, testing bulb, etc
• Place the car alarm siren on top of a solid metal surface and then drill a hole to pass the wires coming out of the siren into the compartment area of the car.
• The next thing will be to power up the siren; this can be done by connecting the siren wires to the car battery
• Place a fuse on the power cable close to the battery. The size of the fuse may vary; refer to the installation manual
• Install the shock sensor as shown in the installation manual. The best place to install it can be under the dash. It will help in detecting the front and rear shocks equally
• Place the LED indicators on the dash by drilling a hole on it, passing the LED cables through the opening and putting the two-sided mounting tape at the backside of the indicator and then positioning on top of the hole created on the dash
• Install other security accessories such as auto lock, door lock, window lock, etc and then test the performance of the clock

How to Install a Camera on Your Car:

• Attach the display panel to the dashboard using the supplied hook and loop tape. The kit comes with an alcohol pad that you should use to wipe the spot you're attaching the tape. Don't skip this part--heat and vibration make cars an unforgiving environment for hook and loop tape, so the tape needs all the help it can get. Insert the power cable into the cigarette lighter receptacle
• Identify a convenient hole to run the cable between the camera and the interior of the car. The license plate frame light is a good call---you'll use the license plate bolts to hold the camera in place anyway. Run the wires into the car and along to the rear lighting housing
• Take the license plate bolts off the car and remove the license plate. Insert the bolts through the camera bolt holes, through the license plate and replace the bolts, along with the now-attached camera and license plates, onto the car
• Strip about 1/4 inch off the two cables that run into the reversing light. Make the incision in a convenient, easily accessible spot. Match the colors and wrap the ends of the camera cables around your new bare patches on the reversing light cables and seal with tape
• Test by placing the car in reverse and viewing the monitor

Package Included:

• 1 x Host
• 1 x Holder
• 1 x USB Cable
• 1 x Controller
• 1 x Car Charger
• 1 x User Manual