4CH MEPG4 DVR & 2.4GHz 4CH Wireless AV Receiver and Transmitter & 1/3" SONY CCD 420TVL 78 LED IR Waterproof Camera SYL-5078+2.4G-2.5W+S-200

Specifications:

DVR:

• Video Format: PAL/ NTSC
• Resolution: PAL: 352 x 288(CIF), 704 x 576(D1); NTSC: 320 x 240(CIF), 640 x 480(D1)
• Maximum Format Rate Per Channel: 25 fps (PAL); 30 fps (NTSC)
• Video Channels: Single Channel/ Four Channels
• Audio Format: 8 Bit, one Channel
• Audio Channels: 3101(one audio)/ 3104(two audios)
• Data Format: MEPG4

System Requirements:

• Screen Set: 1024 x 768
• DirectX: DirectX9.0
• RAM: 256M
• VGA: 32M
• CPU: Intel PⅡ 800M
• USB: USB2.0
• OS: Win2k(sp4)/ Win XP(sp2)

Special Notice:

• For usage of the software, please refer to the electronic manual in the CD-ROM
• Our grabbers are equipped with some precise instruments. When they are moved or installed, please be careful
• Make sure that your PC USB interface is 2.0 version, since our grabbers just support USB2.0
• To prevent non-image display, please connect cameras to USB grabbers and power on the cameras, before installing USB grabbers to computer
• If you need to remove the USB grabber, please follow the steps; right click the taskbar→ stop device→ pull out the USB grabber
• Using our grabber with other USB devices simultaneously may cause the problem that PC can not identify USB grabber. Do not insert two or more USB video capture grabbers or use with other PCⅠvideo capture grabbers at the same time
• In case of problems, please contact with local technical support for professional help

2.4G Wireless Receiver Transmitter Kits:

Receiver:

• Color: Silver
• Receiver Channel: 4 Channels
• Frequency: 2.411GHz, 2.431GHz, 2.451GHz, 2.471GHz
• Voltage: DC 12V
• Output Current: ≤300mA

Transmitter:

• Frequency: 2.411GHz, 2.431GHz, 2.451GHz, 2.471GHz
• Transmitting Power: 2500mW
• Transmitting Distance: 350M
• A/V Mode Method: FM
• Transmitting Format: PAL/NTSC
• Input: Video out +R/L Audio in
• Output Current: ≤1600mA
• Voltage: DC 12V
• Operating Temperature: -10℃~50℃

Features:

• Four transmitters can be connected to only one receiver at one time
• Auto switch function, when connected to four transmitters, it can switch automatically to another picture of transmitter every 5 sec
• Strong noise immunity, high transmission frequency can prevent 900 MHz frequency channel crowded to capacity radio telephone interference of signal from effectively extremely
• High quality of video and real stereo wireless transmission

Attention:

• Should install it at the place where children Cannot touch
• Do not expose it at the dam place for preventing it from water or protecting people from electric shock
• Please pull the transformer out when you stop using it
• Please use the transformer produced by our company. Or our company will not be in Charge of any damage incurred by the product
• Our company will not be responsible for any damage incurred by your amending or dismounting without a permit
• Do not touch the emission antenna in case you will be burned when the transmitter is electrified

CCD Camera:

• Regulated power supplies are recommendable
• Switch to the right type of autoiris lens when you use the camera, in this way the lens can be controlled by the adjustable level
• Auto tracking white balance
• Internal synchronization sync system
• For both indoor and outdoor monitoring
• Image Sensor: 1/3"SONY  CCD
• Effective Pixels: PAL: 512(H) x 582(V), NTSC:512(H) x 492(V)
• Horizontal Resolution: 420TV lines
• Signal System: PAL/NTSC
• Minimum Illumination: 0.000Lux x F1.2(LED on)
• LED: Φ5  78PCS
• Infrared Lamps: 60m
• Backlight Compensation: ON
• Shutter Speed: 1/50(1/60)-1/100,000sec
• White  Balance: Auto
• S/N Ratio: More than 48db
• Operation Temperature: ~20℃+60℃ RH95%Max
• Sync System: Internal Synchronization
• Power Requirement: DC12V±10%2000MA  
• Size: 137 x 102 x 90mm / 5.4 x 4.0 x 3.5in (L x W x H) 
• Video Output: 1.0Vp-p.75Ω

Details:

• Choosing a high quality Wireless Transmitter Receiver is the key to security monitoring system or other similar devices

• If you are searching for a signal Wireless Transmitter Receiver, we would like to introduce you this camera transmitter & receiver

• This Wireless Transmitter Receiver kit allows you to transmit video and audio from one location to another which is perfect for home and office using

• This Camera Transmitter Receiver is well-designed with four frequencies and very easy to install and use

Instruction:

• Should be installed it at where children cannot touch
• Do not expose it to damp place to prevent it from water so that people can be protected from electric shock
• Please pull the transformer out when you stop using it
• Please use the transformer produced by our company. Otherwise, our company will not be in charge of any damage incurred by the product
• Our company will not be responsible for any damage incurred by your private amending or dismounting without permiting
• In case you are burned, do not touch the emission antenna when the transmitter is electrified

Home Entertainment Wireless:

• Home entertainment is moving to the wireless data transmission era, and the figure presented to us a wireless solution

• Wireless AV transmitter will be connected to one end with the camera or other Graphic audio-visual output devices, through our wireless AV transmitter and receiver system, by wireless AV receiver to receive and displayed on the terminal devices. Wireless av transmitter and receiver make the home entertainment wireless

• Via wireless A/V adapters that enable you to wireless-lize their wired TVs, media center, and other video/audio electronics

Package Included:

• 1 x 1/3" SONY CCD 420TVL 78 LED IR Waterproof Camera
• 1 x USB DVR
• 1 x CD
• 1 x Transmitter
• 1 x Receiver
• 2 x Antennas
• 2 x AV Cables
• 1 x Adapter for Receiver
• 1 x Adapter for Transmitter
• 1 x Power Adapter