1/4 Inch High-sensitivity CMOS Sensor IP Network Security Wireless Camera GD2806

Specifications:

• Imaging sensor: 1/4 inch COMS, 300000PIXELS. Minimum Illumination: 1lux
• Video System: NTSC/PAL
• Video Compression: H.264 baseline Profile @ level 2.2
• Video Resolution Adjustment: 640 x 480(VGA), 320 x 240(QVGA)
• Video Parameters: Brightness, contrast
• Stream format: Pure video stream or composite video & audio stream
• Video Frame rate: 1 - 30 frame/sec
• Video compression code rate: 16Kbit/S~4Mbit/S
• Audio input: Input Model Optional: One linear input, Impedance: 1KΩ; One built-in mirophone input
• Audio compression: G.726
• Audio output: One linear output
• Communication interface:  One 10M/100Madaptive ethernet interface
• Wi-Fi Module:  Supporting IEEE802.11b/g
• Power Supply: DC 9V/1.5A
• Maximum Power: 6W
• Operating Temperature: 0~40℃
• Operating Humidity: 10 ~ 85%
• System Requirements: Microsoft Windows ME/2000/XP/NT 5.0/Vista; Brower: Microsoft Internet Explorer 5.0 or Later Version

Features:

• Powerful high-speed video protocol processor 
• High-sensitivity CMOS sensors
• IR night vision(Range: 5m)
• Remote Pan/Tilt rotate(Horizontal: 270deg. /Vertical: 120deg.) 
• Optimized H.264 video compression for low-bandwidth transmission
• Supporting up to 10 users online simultaneously 
• Multi-level users management and passwords definition
• Embedded Web Server for users to visit by IE
• Support wireless network (Wi-Fi/802.11b/g)/mobile networks (CDMA1X and GPRS)/mobile phones
• SD card for local storage, support SD2.0 and Max.32GB capacity
• Supporting DDNS, LAN and Internet (ADSL, Cable Modem)
• Built-in/additional microphone, support bi-directional call and voice broadcast
• Giving alarm in case of video loss or motion detection (settable defense zone and sensitivity).
• Supporting image shielding/image snapshot
• Supporting multiple network protocols HTTP/TCP/IP/UDP/STMP/ DDNS/DNS/SNTP/DHCP/FTP. 
• Supporting remote system upgrade

Details:

• IP network security wireless Camera

• Supporting remote system upgrade

• Camera optional rotation

How to Set Up IP Security Cameras:

• Mount the camera (screw it in place or use the attachment that came in the box) in a location close to a power outlet
• Install a network cable to the location of your mounted camera. One end of the network cable is plugged into a port on the back of the wireless router
• Plug the network cable into the camera and insert the power cable prong into the outlet
• Insert the CD that came bundled with your camera and install the security camera software and driver. This software suite is the central hub on the camera's viewing and recording. You will have access to numerous controls and features

Package Included:

• 1 x IP Camera