ES-71II DCamera Lens Hood for Canon EF 50mm f/1.4 USM

Specifications:

• The Canon lens hood prevents glare by stopping light from coming into the lens at side angles
• Designed to prevent unwanted stray light from entering the lens
• Ensures no problems with vignetting or motor functions
• Added benefit of extra protection from accidental impact
• The Canon lens hood can assist in keeping moisture or wind-blown debris off the lens
• The Canon lens hood is designed to prevent glare by stopping light from coming into the lens at side angles
• Protects lens from scratches and impacts, protection for the front lens element against rain and mechanical damage
• Interface: Bayonet
• Compatible with: Canon EF 50mm f/1.4 USM 

Details:

• The Canon lens hood is designed to prevent unwanted stray light from entering the lens

• The camera lens hood for Canon protects lens from scratches and impacts

• It ensures no problems with vignetting or motor functions

• It can provide protection for the front lens element against rain and mechanical damage

How to Use Lens Hood in Studio:

• Remove the lens cap from the camera
• Attach the lens hood to the camera. Lens hoods attach by screwing into, clipping onto, or fitting over the outside of the lens
• Check the shadow of the lens hood. If direct light is passing into the lens, it will appear as a "lens flare". Adjust the lens hood to block direct light by twisting it on the lens
• Check the position of the lights, reflectors and subject. Using a lens hood is preferable in a studio situation in which the lights, reflectors, and subject are set up optimally, but light is still directly entering the lens and causing flares. If there is no better orientation for the studio lighting equipment or subject, a lens hood is the best choice to block excess, flaring light

Methods to Clean Mold on Camera Lens:

• Purchase a cleaning product. These include Clorox Germicidal Spray, Tilex Mildew Remover and 500 PSI Mask Scrub. You can use almost any product that removes mold on glasses or lenses. Read the warning label for the product you choose
• Rub the lens cloth over the camera lens. Remove any grime or dirt that is present. This will allow you to see the damage more clearly
• Dip one lens cloth in warm water. Squeeze out any surplus of water. Extra water can seep into the camera if not careful
• Wipe the lens with the damp cloth. Concentrate on the mold section and any small creases around the camera lens. This will move any remaining dirt
• Spray or pour a drop of cleaner on the second lens cloth. Polish the camera lens thoroughly. Cover ever part of the mold pores including around any creases
• Use the third lens cloth to wipe the moisture off. Towel it completely dry. Then store it in a safe, dry location

Package Included:

• 1 x Canon Lens Hood