Vehicle DVR Rotatable Car Camera Recorder Monitor

Specifications:

• LCD Display: 2.0LTPS(4:3)
• Lens: 140°High Resolution A+ Wide Angle Lens
• Video Resolution: VGA/D1/DH(1280x960)
• Video Format: AVI
• Image Format: JPG
• Memory Card: MicroSD
• Microphone/Speaker: YES
• Self-Timer: 2SEC/10SEC+2SEC
• LED Light: Dual super bright LED
• TV Mode: PAL/NTSC
• Frequency: 50HZ/60HZ
• USB Port: USB2.0
• Power Input: 5V 500MA
• Battery: Rechargeable Li-ion

Features:

• The car camera is very Portable because it can rotate 180 degree
• Built-in 1/4 inch low noise sensor,can capture clear images in low light environment
• Day/Night Selectable modes can help you choose the right mode
• Auto Sensitivity Control of this car camera is very convenient
• Built-in simultaneous charging and recording mode are full of high technology
• This car DVR supports High capacity Micro SD card
• Can catch amazing image through the LCD display when taking self-portrait
• Anti-Shake Mode of this car camera monitor will help you a lot when you are driving
• Auto power on when starting card, Auto power off when car is off
• It can record while LCD is off

Details:

• Look at the Vehicle DVR Rotatable Car Camera Recorder Monitor

• Auto Sensitivity Control and High performance dual LED light make this car camera very useful

• Auto power on when starting card, Auto power off when car is off

NOTE:

• If you need different color or similar items, please click the following photos to visit my eBay store to find it

How to Install a Rear-View Camera in Your Car

• Rear-view cameras are especially useful in tight parking lots, dark areas or in places where children might be running around. You can install as many of these cameras as you want, though one or two is usually enough
• Things You'll Need: Screwdriver, Rear-view camera, Drill, Wire connectors, Wrenches (various sizes), Wire cutter and stripper
• Disconnect the battery cables from the battery. Check the vehicle's repair manual to find out what size wrench to use. Leave the disconnected cables a safe distance from the battery posts
• Decide where you want to install the rear-view camera. Most people put them in the plastic bumper so they don't have to drill into the car's sheet metal
• Drill a hole for the camera. Check the installation instructions to see what size drill bit to use. Don't make the hole too large or the camera will fall out
• Place the camera in the hole using the rubber grommet supplied with the camera. Make sure the camera and grommet are tight
• Attach the camera's power wire to the backup-light power wire on your car. You'll have to splice the wires together. Use wire cutters to cut the wires, leaving enough excess wire to reconnect. Strip the ends of the wire to expose the bare wire using wire strippers. Splice the wires together using a two-into-one connector. This will give the rear-view camera power when you put the car in reverse
• Route the camera's output wire to the rear-view monitor and connect the wire to the monitor's input. For installation of the monitor, see the monitor's installation instructions
• Reconnect the battery, start the car and put the car in reverse. The rear-view monitor should turn on and give you a view of what's behind you

Package Included:

• 1 x Camera DVR
• 1 x Stand of Bracket
• 1 x USB Cable
• 1 x Car-mounted Charger
• 1 x User Manual