SUVPR High Quality 36V 150W USB Car Power Inverter

Specifications:

• Input Voltage: DC 30V-45V
• Output Voltage: AC 220 50Hz
• USB Output: DC 5V 0.5A
• Power Rating: 150W
• Short Time Rating: 200W
• Max Power: 300W
• Reverse Terminal Protection: Yes
• Lower Voltage Stop: 30V±2V
• Over Voltage Stop: 45V±2V
• Short Circuit Protection: Yes
• Protect Temperature: 70℃-90℃
• Size: 121 x 61 x 34mm/4.8 x 2.4 x 1.3in (L x W x H)
• Color: Black

Features:

• This car inverter can convert DC to 220V 50Hz AC and USB 5V DC, outputting the 150W rated power
• You can gain the emergency power when blacking out or playing in the outdoor
• The power is the family's necessity to have emergency power supply
• The output from USB port allows you to charge iPhone/iPod, MP3/MP4 players and Notebook computer at the same time
• Noise free with Silence design
• The Aluminum casing of this Multifunction USB Power Inverter can help dissipates heat faster
• Dynamic DC bus voltage regulation
• Soft-start technology can improve its reliability
• This Multifunction USB Car Power Inverter has built-in USB power port lets you charge USB compatible devices
• This Multifunction USB Car Power Inverter is loaded with safety features such as overload protection, auto-reset short circuit protection, low battery indicator and low battery shutdown
• Just power and charge your notebook, mobile or smartphone, MP3, PDA, or any mobile device from your car by turning your cigarette lighter into a powerful wall outlet
• This Multifunction USB Car Power Inverter is the best choice for your self drive, field work and entertainment

Details:

• Ultra compact and an highly portable power inverter

• USB port allows you to charge iPhone/iPod, MP3/MP4 players and Notebook

• Noise free with Silence design

• Use along with insert, suitable for all kinds of cars

Usage:

• You must ensure that the battery's voltage specification of your car is the same as the inverter(3 pieces batteries voltage is 36V and 4 pieces batteries voltage is 48V)
• If the battery's output interface accordance with the inverter and the battery positive connecting to socket "N", use the electrical plug plugged into the inverter AC output socket

How to Install a Car Power Inverter:

• Park the vehicle and open the hood. Disconnect the battery by loosening the positive cable with a wrench and pulling it free with your hand
• Mount the power inverter. Pick a location which will allow plenty of air flow around the inverter as they heat up when used. A typical mounting location is on the lower kick panel in the passenger side of the vehicle under the dash
• Wire the inverter. Run a length of wire from the positive side of the inverter to the car's battery by running the wire through a grommet in the firewall
• Connect the wires. Connect the new positive and negative wires to the wires coming from the inverter to the wires you installed into the vehicle by placing terminal ends on the wires and crimping them in place in the same manner as the positive wire at the battery

NOTE:

• This product's plug "N" is the anode and "L" is the cathode. Please refer to the battery's polarity or will stop working
• This product rated power is 150W. It will stop working if exceeding the rated power
• It will produce calorigenesis. Please keep good ventilated and do not put something on it
• It is not a waterproof product so never be used in the condition of humidity 

Package Included:

• 1 x Car Power Inverter