![Metersbonwe Every day special] summer the Metersbonwe of men's casual pants shorts Korean Slim trousers men fashion](http://p.lefux.com/61/20130514/T0001DCSMN/every-day-special-summer-the-metersbonwe-of-men-39-s-casual--0-small.jpg)
-
-
Specifications:
- You'll love this mens cotton pants for its freedom of movement and soft comfort
- Stay at the forefront of style with this fine detail and fashion design men's pants
- These straight leg pants will give you soft hand and comfortable feel
- The mens casual pants can be matched with a variety of clothing
- Made of high quality material, breathable, durable and comfortable
- These mens cotton pants will become a staple in your wardrobe
- They are fashionable enough as a perfect gift for someone special or treat for you
- Material: Cotton & Polyester
Details:
- Stylish design and high quality material make these mens cotton pants cool, handsome and outstanding
- These mens cotton pants are a perfect gift for someone special or treat for you
- The fine details and fashion design will complete the look that is professional and polished
- High quality cotton and polyester materials ensure durability for daily as well as business wearing
Size in Detail:
Size
Waist
Pants Length
30
70.7cm/30.2in
105cm/41.3in
31
79.9cm/31.5in
105cm/41.3in
32
83.3cm/32.8in
106cm/41.7in
33
86.6cm/34.0in
106cm/41.7in
34
89.9cm/35.4in
107cm/42.1in
35
93.3cm/36.7in
107cm/42.1in
36
96.6cm/38.0in
107cm/42.1in
37
10.0cm/39.7in
108cm/42.5in
38
103.3cm/40.7in
108cm/42.5in
NOTE:- These dimensions are for reference only. Specific dimension varies from person to person
How to Measure Men's Pants:
Sometimes it may be difficult for men to find pants that fit them correctly. If a man is looking for comfort, he might buy pants that are too big. The pants could also be too long or short. There is a way to ensure that you purchase the correct size pant. If you know your measurements, finding pants that fit becomes easier. Pants that fit well can enhance your appearance and give you a neater style and look- A. Measure Your Waist: Place the measuring tape an inch over your belly button. While measuring, stand up straight and do not hold your stomach in. Add another inch to the measurement to find your waist size. Most stores carry waist sizes that range form 30 to 42 inches
- B. Measure Your Hips: Place the measuring tape directly across the hip bone area. Usually a man's hip area is almost the same measurement as his waist. But sometimes the waist area is bigger then the hips. If the waist is much bigger than the hip, the fit may be baggy around the crotch area and legs. Buy pants that fit the largest part of you and get them professionally altered to fit your body
- C. Measure Your Crotch: Measure the crotch length by starting at the front center waistline and extending your tape measure in between the legs and up to the back center waistline. The crotch depth is measured by sitting on a chair and measuring from the side waist to the chair seat
- D. Thigh: measure around fullest part of upper leg while standing
- E. Measure Your Inseam: Place the measuring tape at your natural crotch to get your inseam Measurement. Let the tape fall until it reaches the top of your shoe. Pants should cover the top of the shoe, but they should never touch the floor. They should stop right over the back heel area of your shoe. Wear the shoes that you will most often wear with the pair of pants you are fitting. Shoes make a difference in the inseam measurement
- F. Measure Pants for Hemming: When measuring pants for hemming, consider the width of the pant leg, as skinner pants can be hemmed shorter and wide-legged pants look better longer. Measure pants for hemming, make sure each side is equal
How to Steam Press Men's Pants?
Keeping more of your money in your wallet is easier when you learn how to steam-press men's pants. By following the steps below, you will be able to press men's pants instead of taking them to the cleaners, saving time and money.- Check the care tag of the pants you are ironing and set the iron to the suggested temperature setting. Do this step for every pair of pants you iron. Lightly spray the pants with water and wait a few minutes for the water to soak in a bit
- Place the pants on the ironing board. Grasping the waist with the zipper between your thumbs, pull them onto the narrow end of the ironing board, until the narrow end of the ironing has reached down the leg. Straighten the fabric by stretching it a bit by the waist band and by making sure the side seam follows the line of the ironing board. Push the pocket down to its normal place by reaching inside the pants and straightening it. Press this area, making sure to get the zipper flap as well.
- Slide the pants off and slide the other front side onto the ironing board. Follow the same steps as listed in Step 2.
- Flip the pants over and pull them onto the ironing board to iron the back portion. Flatten down pocket flaps and make sure the inside pockets are laying straight down before ironing. Pull up on the waistband to straighten any areas and use your hand to flatten areas as needed. Iron, making sure not to forget the waistband.
- Grasp the pants by the bottom of the legs. Place the inside seams together, then match up the outside seams. Lay them down on the ironing board with the legs on the wide part of the ironing board. Take the top leg and pull it back; you should see the inside seam of one leg, which should be somewhere close to the middle all the way up to the crotch. Gently set the leg you are holding down over the top part of the pants while you iron the other leg. Usually you can see the seam from previous pressing; try to maintain this seam. Run your hand over the leg and you can feel anywhere that fabric is folded over; straighten it out. Make sure the seam is straight and iron that leg.
- Pick up the leg that you set aside and lay it on top the ironed one, straightening it and matching the front seam with the previous one. Flatten any folded fabric with your hand, making sure to feel any folds underneath the top layer. Once it is flat, iron this side of the pant leg, pressing the front and back seams in.
- Flip the pants completely over on the ironing board and repeat Steps 6 and 7. Hang the pants on plastic hangers (metal ones create fold creases) by inserting the legs through the opening almost halfway. Bring your hand up underneath to make sure there are no folds caused by the hanger.
Package Included:
- 1 x Men's Pants
Get DinoPoint™ by Writing reviews, Post Images, or Post Videos. The first five customers can get double points!
Elizabeth M Smith
from ()
Bought this item on
09-16-2010- Other Thoughts: These pants are quite warm and very comfortable. They are made a bit long but I have never found the extra length to be a real problem. I would recommend them highly.
Was this review helpful?
Joe Rassenfoss
from ()
Bought this item on
01-20-2010- Other Thoughts: Good quality. I was expecting soft fabric, these are the harder (cotton like) fabric that makes a brushing noise when you walk. If this is want you want give it 4 or 5 stars
Was this review helpful?
Yvan TROUCHE
from ()
Bought this item on
11-17-2010- Other Thoughts: They're pants. They have pockets, which is nice. They're fairly long, which is also nice. No elastic around the ankles which is great. Also, they're soft. So they've got that going for them. The fabric appears to be of decent quality. All in all a decent product.
Was this review helpful?
Aaron Stewart
from ()
Bought this item on
02-03-2011- Other Thoughts: So well made and very comfortable! Highly recommend these pants. And I’m considering buying a pair more.
Was this review helpful?
Rehia CHUNG TIEN
from ()
Bought this item on
12-20-2010- Other Thoughts: Nice material. Warm but not overbearing. <br/>Very breathable. I needed some comfortable pants to lounge around in during the day/weekends. These will do the job, but watch out for the sizing. I recommend.
Was this review helpful?
Maybe you are interested in:
