Cat.6a Flat Lan Cable RJ45 8p8c to RJ45 8p8c 25m

Specifications:

• Connects all hardware in a LAN
• With smooth, stress relief modular structure, even in extreme environments can also enhance the strength and flexibility
• Meet the latest EIA / TIA Cat.6 and Cat.6e transmission requirements
• The Lan Network Cable is finished with Cat.6 and Cat.6e matched to achieve the best transmission performance
• EIA/TIA 568A / B wire color code to ensure the cable is installed correctly
• Compatible with six standard plug
• Backwards compatible with all Cat.5e products
• The Cat6 Lan Cable jumps from 1.0m-25.0m with different lengths
• Standard Impedance 100 ohms
• With shielding
• Size: 25m / 82.02ft (L)

Details:

 

• Ultra low profile design, without cross keel of ultra-soft characteristics of the particular production process, for the engine room, rack installed anywhere

• This 25m Cat.6a Flat Lan Network Cable RJ45 8p8c To RJ45 8p8c meets the latest EIA / TIA Cat.6 and Cat.6e transmission requirements
• The Ethernet Lan Cable backwards compatible with all Cat.5e products

• The Lan Network Cable is EIA/TIA 568A / B wire color code to ensure the cable is installed correctly

How to Connect an RJ45 Cable?

In order to connect your computer to the Internet using a broadband connection, you will need to incorporate the use of RJ45 (Cat5) cables. These Ethernet cables are not hard to use. The most difficult part would be deciding which type of RJ45 you need. The RJ45 crossover cable should be used if you want to connect a computer network together, without going through a router or other networking device. If you do desire to use a networking device, you should use the RJ45 straight cable.

Instructions:

RJ45 Crossover Cable

• Ensure that the computers you want to connect the RJ45 crossover cable to has network interface cards (NIC) installed. Most computers have built in NICs. If your computers do not have NICs installed you will need to have one installed on each computer you intend to use
• Power on both computers
• Take one end of the RJ45 crossover cable and connect it to the NIC slot on the back of computer No. 1. It should click into place
• Take the other end of the RJ45 crossover cable and connect it to the NIC slot on the back of computer No. 2.

RJ45 Straight Cable:

• Power on your router or networking device. Power on your computer
• Connect one end of the RJ45 straight cable to the WAN (Wide Area Network) port that is located on the back of the networking device
• Insert the other end of the RJ45 straight cable into the Ethernet port that is located on the back of your computer

Package Included:

• 1 x Cat.6a Flat Lan Cable RJ45 8p8c to RJ45 8p8c