Bullet Style 480TVL Hi-res ( Ex-view ) CCD Camera CM-2603CHWV

Specifications:

• Signal Format: PAL/NTSC
• Image Sensor: Hi-res ( Ex-view ) CCD
• Effective Picture: PAL: 768(H) x 494(V), NTSC: 752(H) x 582(V)
• Scanning System: NTSC: 525Lines, 60 Field/Sec, PAL: 625Lines, 50 Field/Sec
• Sync System: Internal Synchronization
• Resolution: 480TVL
• S/N Ratio: More than 48dB (AGC Off)
• Gamma Characteristic: 0.45
• Minimum Illumination: 0.5Lux, 0.01Lux ( Ex-view ) CCD @ F:20 (D:1.5Lux, N: 0.05 Lux)
• Gain Control: Auto
• B.L.C: Auto
• Electronic Shutter Speed: NTSC: 1/60 - 1/100,00Sec, PAL:1/50 - 1/100,00Sec
• Video Output: 1Vp-p . 75ohm, Negative
• Power Supply: DC12V±10%
• Current Consumption: 130mA ± 10%
• Operating Temperature: -10~+50˚C
• Storage Temperature: -20~+60˚C

Details:

• This CCD Surveillance Camera is perfect for the job! This amazing Color CCD Camera is ideal for covert or spy operations

• If properly placed, the wide field of view angle enables you to view a whole standard size room. This Digital CCD Camera is also great as a surveillance camera. A must-have safety CCD Surveillance Camera for you

• When picture shown up on the monitor, adjust the camera to make the camera to the suitable position and lock the bracket by screw.This CCD Surveillance Camera is easy to setup and simple to operate

What are the recommended camera placements to capture the most relevant shots:

• Never angle a camera to look straight down. A camera that's pointed straight down will only catch the top of a perpetrator's head. The camera will most likely miss many of the distinguishing characteristics that can be used to identify a person later if necessary
• Always make sure to have a camera facing all entrances It is a fact, that the best time to catch the facial features of an individual is during their entrance into the building, whether it is your home or your business. Other cameras can catch the act of someone in the act of stealing; however, without the critical entry-shot you may not be able to identify the individual
• Never allow direct sunlight to touch the lens of the camera. Regardless of which cameras you use, make sure that the cameras are never mounted in such a way that sunlight will directly shine into the lens. This will cause the Image sensor to discolor and fail. Direct sunlight will also immediately void any warranty
• Mount I/R Cameras within 20 ft. of subject being viewed.  Infrared bulbs emit an invisible light spectrum that will illuminate a subject even in complete darkness...however, the light will only project out 20-40 ft. to illuminate the target
• Always plug cameras into a surge suppressor or Battery Back-up unit. Cameras are extremely sensitive to voltage changes and can fail prematurely. Voltage changes will also void the cameras warranty

Package Included:

• 1 x Hi-res ( Ex-view ) CCD Bullet Style Camera
• 1 x Bracket