Customers Also Bought
- Certification: CE/ROHS
- Input Voltage: AC 100-240V
- Input Voltage Frequency: 50/60Hz
- Output Voltage: DC 12V +/-5%
- Total Output Current: 5A
- Total Outputs: 4
- Fuse Type: PTC (Resetable)
- Fuse Rating: 2A
- General Protection: Each output has independent PTC fuse and LED indicator, when problem occurs, only affect the independent output, other outputs still working
- Circuit Short Protection: When short condition occurs, independent PTC fuse will open the circuit,when condition removed, PTC fuse will automatically back to close
- High Voltage Protection: When high voltage occurs, the surge protection will be hit through to protect the connected device
- Over Current Protection: When over current occurs, the power supply will automatically switch to self-protection status, when condition removed, then switch back to normal
- Each output has independent PTC FUSE and LED indicator,when problem occurs,only affect the independent output,other outputs still working
How to Install a Power Supply Box for Security Cameras:
- Mount the power supply box on the wall using your drill and the supplied mounting screws. It should be close to an outlet and your security camera cables. If you can, mount the box over a stud and drive the screws into the stud. The mounting screws that came with your box may not be long enough to penetrate the drywall and the stud adequately. If this is the case, use two-inch drywall screws, which can be purchased at any local hardware store or large department store
- Remove the punch-out from the power supply box that will provide the best place to insert the power wires from your cameras
- Split the power wires from the Siamese cable (if applicable) and strip the power wires about 1/2 inch and twist the copper strands together
- Insert the camera power wires through the punch-out and connect them to the power terminals. The power terminals will be marked positive (+) and negative (-) or common. Make sure you connect the red wire or the wire marked positive to the positive side of the power terminal. The positive wire is usually red, marked with a stripe, or marked with a plus sign
- Close the box, securing it with the provided screws or lock. Insert the power cord in the box (this cord works just like a computer power cord) and plug the power cord in. Your power supply box may have come with the power cord built into the box. If so, simply plug the power cord into a wall outlet
- 1 x 12V DC 4 Outputs Switch Mode CCTV Camera Power Supply
If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Before that, please contact our Live Support to inform that.
In that case we will refund you the payment excluding actual shipping fees already incurred.
If the item is defective, please contact DinoDirect Live Support and send an email to us at email@example.com attached an image or video file clearly showing the defect of the product. And we will give you a response within 24 hours whether we will resend the item or refund the payment to you for compensation.
For customization, please consider carefully before ordering.Because we do not accept return and replacement.
|Unit Price||USD$ 96.41||USD$ 92.99||USD$ 89.58||USD$ 85.02|
|Enter Wholesale Channel>>|
• If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Please contact our Live Support to inform that.
• Please contact Live Chat or click here to learn more return policy.