Mini 540TVL Hi-res(Ex-view)CCD Color CCD Camera CM-3125CHP4

Specifications:

• Signal Format: PAL/NTSC
• Image Sensor: Hi-res(Ex-view)CCD
• Effective Pixels: 768 x 494/NTSC, 752 x 582/PAL
• Scanning System: NTSC:525lines, 60Field/Sec, Pal:625Lines, 50Field/Sec
• Sync System: Internal Synchronization
• Resolution: 540 TVL
• S/N Ratio: More than 46dB (AGC Off)
• Gamma Characteristic: 0.45
• Illumination Sensitivity: 0.5 Lux, 0.01lux(Ex-view CCD)@F:2.0(D:0.5lux,N:0.05lux)
• Gain Control: Auto
• B.L.C: Auto
• White Balance: Auto
• Electronic Shutter Speed: NTSC:1/60-1/100,000Sec, 1/50-1/100,000Second,auto
• Video Output: 1Vp-p75OMS, Negative
• Power Supply: DC12V+/-10%
• Current Consumption: 130mA+/-10%
• Operating Temperature: -10℃~+50℃
• Storage Temperature: -20℃~+60℃

Features:

• This CCD Security Camera is easy to install and assemble
• High resolution, high sensitivity and high s/n ratio
• Low illumination, high quality image
• CCD sensor can Prolong the work life of camera
• With DSP and CCD chip, image is clear and stable
• The CCD 540TVL Camera also features a completely waterproof cast casing with sliding hood to keep rain and snow from blurring the lens

Details:

• This is a mini CCD Color CCD Camera

• 540TVL, S/N ratio more than 46dB (AGC Off) and sync system by internal synchronization

• This Color CCD Camera is made of high quality material

• This camera is lightweight and easy to use

CCD Cameras Definition:

Definition of a CCD:

• CCD stands for Charge Coupled Device(s). They are responsible for turning RGB light into electronic RGB signals. They are usually located directly behind the lens of the camera.

Types of CCDs:

• Depending on the quality of the camera, there may be one or multiple CCDs to collect RGB data. Budget consumer cameras usually only have one CCD to process the RGB signal. Higher end cameras may have three or more, one for each Red, Blue and Green signal.

Features of the CCD:

• Multi-CCD cameras are often paired with a beam splitter or prism block which redirects the incoming white light into its respective RGB CCDs. This allows for clearer color definition.

Identification of the CCD:

• A CCD looks like a standard computer chip and it is advisable to take it out occasionally for a gentle cleaning.

Higher Quality CCDs:

• A higher quality CCD may contain millions of pixels to make the image look as vibrant as possible.

Introductions:
 

• Do not use the camera if fume, or if it seems not functioning correctly. Disconnect the power cord immediately, and consult your dealer
• Do not adjust or modify the camera's internal circuits or power supply modules, as it may be dangerous and cause damage to the unit. For internal settings and repairing, consult your dealer
• Make sure that no metal objects or flammable substance get inside the camera that may cause damage to the unit. If water or a liquid get inside the camera, disconnect the power cable immediately, and consult your dealer. Be careful to protect the camera from direct exposure to weather, rain, etc
• Do not drop the camera or subject it to strong shock
• It may interfere with or distort the image when install close to an electric or magnetic fields
• Do not install it where there is greasy smoke or steam, where the moisture may get too high, or where there is a lot of dust. Do not install close to stoves, or other heat generating devices. Such as spotlights, etc. Avoid places where there is direct sunlight
• Don't directly touch the CCD element. If necessary, use a soft cloth moistened with alcohol to wipe off the dust

How to Protect Your Home With an Outdoor Security Camera?

• Determine the purpose of your outdoor security camera: will you be monitoring to see who comes up to your front door or do you want to be able to watch all angles of the perimeter of your house and yard?
• Determine the view angle you need from your camera. In general, the wider the view the more the camera will record. This is particularly important if you will be using your camera to see who is approaching your front door and you want to be able to determine whether or not they are alone
• Determine the picture quality that you will need from your security camera and choose a camera that will provide it. While many screens are small and can use a lower resolution, a higher resolution will provide a clearer picture
• Choosing a wireless security camera? Choose a camera with a transmission range that will suit your needs; keep in mind that the walls of your home will reduce the range a wireless camera will have
• Planning to record the signal? Choose a camera that will broadcast to the system that you have chosen: closed circuit tv, your computer or a digital video recorder

• Do you want to have a camera that will be on all the time or do you want a camera that will start recording when movement is detected? Either way, a motion detector camera can make sure that you are able to record anything that happens
• Determine the size and type of security camera you are looking for. Do you need a camera that can zoom in, a camera that blends in or a camera that can record sound?

• Lastly, determine whether you want a camera that is monitored by a security company or not; if you do, be sure to choose the right company. Ask questions and get recommendations

How to Install an Outdoor Security Camera System?

• Select the type of connection you want; you can choose a wired or a wireless connection. Wireless systems are easier to install with no limitations on the distance between the devices and the monitors. Be aware, however, that wireless connections are subject to signal interference. If you choose to install a wired connection, it will require more work, but you won't have any signal interference. Wireless cameras are also battery-operated, so you will have to replace the batteries periodically. Wired cameras connect to the monitors, which run on the main power source

• Decide where you want your security camera. Place your camera in a position that will display the entire area you wish to view. Then, decide whether you want your camera visible or hidden. If you set up a wired camera system, hiding and wiring your device will be more difficult
• Drill holes for mounting the brackets. If you are setting up more than one camera, make sure you allow enough distance in between. Test your camera or cameras by turning them on and placing them in position. View the coverage area and decide where to drill your holes. If you are using a wired system, make sure the camera cables are long enough to connect your camera to your monitor

• Attach the brackets using the screwdriver. Regardless of whether your camera is on the ground or on a wall, you will need brackets to securely position your camera. Make sure your brackets are tight and stable enough to hold the camera
• Mount the camera on the brackets. Make sure everything is tightly secured
• Select a location for your monitor. The monitor should be where you spend the most time. If you are using a wireless system, you have completed the setup process

• Run a cable from each camera to your monitor if you are using a wired system. Cables can run along door and floor edges or under a carpet. Use electrical tape or a staple gun to secure your wires. If your monitor does not have multiple plugs for your camera cables, you need to purchase a multiplexer. Plug your camera cables into the multiplexer and plug the multiplexer into the monitor
• Turn on your system to view your area

Applications:

Package Included:

• 1 x Mini 540TVL Color CCD Camera
• 1 x Cable
• 1 x User Manual