-
-
Specifications:
- Tests insulation of wires, cables, transformers and electrical motors
- Sensitive Ohmmeter for checking resistance of motor windings
- Fast and easy to use, rugged durable design
- Dual display, the main display area Maximum 6600
- Auto / manual range
- AC RMS Measurement
- AC Voltage / AC Current Linear frequency measurement
- 1KHz AC voltage low-pass filtering
- Maximum / minimum / average / relative value measurement
- Maximum 2GΩ insulation resistance
- With polarization index (PI) / induced absorption ratio (DAR) show
- External voltage detection, timing measurements
- Battery voltage detection / low indication
- Auto power off function
- If the measured line resistance is less than 50W, instrument containing a buzzer will sound
- Measurement Between the Earth and End the Maximum Allowed Voltage: 1000V DC or AC
- Mode: Dual slope integration A/D conversion
- Sampling Time: About 0.4 seconds/time
- Display: LCD display, digit height 22mm
- Maximum Display: 1999 (three and a half)
- Polarity Indication: Automatic direction, '-' indicates negative polarity
- Over-range Display: '1' or '-1'
- Unit Display: Display unit with battery
- Power Supply: 1.5V × 6 (AA) batteries (alkaline or high-energy batteries is recommended)
- Power Consumption: 5mA (DC1000V, AC750V, 200Ω,); 30mA (200MΩ/250V); 50mA (200MΩ/500V); 100mA (2000MΩ/1000V)
- Battery Voltage Indication: LCD display symbols
- Operating Temperature: 0 ℃ ~ 40 ℃
- Storage Temperature: -10 ℃ ~ 50 ℃
- Size: 192 x 122 x 55mm / 7.6 x 4.8 x 2.2in(L x W x H)
Insulation Resistance:
- Range: 200MΩ/250V; 200MΩ/500V; 2000MΩ/1000V
- Test Voltage: DC 250V ± 10%; DC 500V ± 10%; DC 1000V ± 10%
- Measuring Range: 0 ~ 200MΩ; 0 ~ 200MΩ; 0 ~ 2000MΩ; 0 ~ 1000MΩ; 1000MΩ ~ 2000MΩ
- Accuracy: ± 3.0% reading ± 5 words; ± 5.0% reading ± 5 words
- Open Circuit Voltage: 250V ± 10%; 500V ± 10%; 1000V ± 10%
- Minimum Output Voltage: 225V: load 250kΩ; 450V: load 500kΩ; 900V: load 1MΩ
- Test Current: 1mA: Load 250kΩ; 1mA: load 500kΩ; 1mA: load 1MΩ
- Short Circuit Current: ≤ 2.5mA
AC Voltage:
- Range: 700V
- Resolution: 1V
- Accuracy: ± (1.2% reading + 5 words)
- Input Impedance: 10MW
- Maximum Input Voltage: 700V AC (rms) or 1000V DC
- Frequency Range: 40 ~ 400Hz
- Response: Average (rms sine wave)
DC Voltage:
- Range: 1000V
- Resolution: 1V
- Accuracy: ± (0.8% reading + 3 words)
- Input Impedance: 10MW
- Maximum Input Voltage: 1000V DC or 700V AC (rms)
Resistance:
- Range: 200W
- Resolution: 0.1V
- Accuracy: ± (1.0% reading + 3 words)
- Open Circuit Voltage: About 2.5V
- Overload Protection: 250V DC or AC (rms)
Details:

- Fast and easy to use, rugged durable design
Package Included:
- 1 x Dual Display Digital Insulation Multimeter Tester
Get DinoPoint™ by Writing reviews, Post Images, or Post Videos. The first five customers can get double points!






















































