Brand New 8-Channel Real-time Network H.264 DVR KT7008

Specifications:

• Standard H.264 video compression format
• 16-bit true-color semi-transparent graphical menu interface, menu options tip
• A variety of recording modes: manual, timing, movement and alarm recording
• Optimized four-channel simultaneous playback (single playback for eight-channel ones)
• A variety of backup (U disk, mobile harddisk, network)
• One USB2.0 for data backup, one USB1.1 for the mouse operation
• Multi-functional operation, recording, playback, monitor, backup and network transmission can be realized at the same time
• Dual stream technology
• Support network to implement multi-screen real-time browsing, parameter setting, copy or playback
• Support phone monitoring
• Support event classification and precise time search and playback
• Defaulted parameter value fast recovery
• Flexible USB interface for mouse
• Video Compression Format: Main profile H.264
• Video Input/Output: NC 8-channel input/2-channel output
• Audio Compression Method: 8kHz 16bit ADPCM
• Audio Input/Output: RCA 1-channel input, 1-channel output
• Alarm Type: Motion detection, sensor trigger, video loss, disk full, disk error
• Alarm Input/Output: 8-channel alarm input /1-channel alarm output
• Display: 1/4/8-channel switchable
• Display Resolution: PAL: D1 (704 576) NTSC: D1 (720 480)
• PAL: D1 (704 576) NTSC: D1 (720 480):  Single-channel PAL: 25fps, NTSC: 30fps
• Playback Resolution: PAL CIF(352288) NTSC CIF(360240)
• Recording Total Frame Rate: PAL200fps@CIF NTSC240fps@CIF
• Recording Mode: Start automatic continuous, timing video, motion detection, trigger alarm
• Video Packing Time: 15/30/45/60 minutes adjustable
• Harddisk: Support one SATA harddisk drive (maximum capacity is 1T)
• Network Protocol: Support DHCP, UDP, TCP/IP, DNS, DDNS, PPPOE and other protocols
• Network Functionality: Support IE browsing, real-time network monitor and network DVR parameter setting
• USB1.0 Interface: Support mouse operation
• USB2.0 Interface: Support mobile harddisk and USB disk backup and upgrade
• Playback Mode: Normal playback, fast forward playback, fast backward playback, manual single-frame slow motion
• Network Interface: One RJ45 10M/100M self-adaptive Ethernet port
• PTZ Control: Built-in RS-485 interface, support Pelco-D and Pelco-P protocol
• Backup Function: Support USB disk backup, mobile harddisk backup, USB burner backup and network backup
• Power Adapter: DC 19V/2.1A
• Power Consumption: 15 ~ 20W (excluding harddisk)
• Operating Temperature: 0℃+50℃
• Operating Humidity: 10%90% 

Details:

How to Replace a DVR Hard Drive:

• Disconnect your DVR by unplugging any cables connected to it, including the power cable. Remove the screws located on the back of the unit that hold the top cover in place. There are usually two to six of these screws, depending on the model of DVR. Lay these screws in a safe place where they won't get lost, and slide the cover off
• Locate the hard drive. This is a rectangular metal unit that measures 3 1/2 inches wide. It is usually located away from the other hardware, often in its own bracket. There will be two to four screws holding it in place. Remove these, disconnect the cables connected to the drive, and slide it out of the system
• Check the label of the drive to see if it is IDE or SATA. It will say which one of the two interfaces it uses. Any replacement desktop hard drive of the same interface type will work in your DVR. Avoid using a laptop drive, because they won't fit and aren't designed for the high-stress environment of video streaming
• Place the new drive into the brackets, and replace the screws that were removed from the old one. Plug the data and power cables into this drive. They will insert the same way they came out of the old one. Once the drive has been installed, put the cover back on the DVR unit, and replace the screws. Hook the DVR back up to the television, and it will be ready to record

How to Copy From a DVR to an External Hard Drive:

• Install video software on your computer. To properly process your data transfer, you need video software, which you can get from computer and electronics retailers or online. Simple, easy-to-use programs can be downloaded for free. Use reputable sites, such as CNET.com, to find some of the more reputable free programs. More advanced programs, with sophisticated editing capabilities, will usually only be available for purchase
• Connect your computer and DVR. In order to copy programs to your external hard drive, you need to transfer them to your computer. For older systems, and especially for desktop computers, you will need to use use RCA connectors to connect the DVR to the computer. RCA connectors are color-coordinated audio-visual cables used to connect electronics components, such as stereos and receivers, and they can be used with some computers and DVRs as well. Plug the yellow ends of the cable into the video jacks on the machines, then plug the red and white ends into the audio jacks. If you have a newer system, use USB cables to connect the computer and DVR. With a TiVo DVR and a wireless home network, you can connect your components wirelessly if you download proprietary TiVo software
• Transfer the program to your computer. Choose the program you wish to transfer from your DVR then press "Play" while pressing "Record" on your computer software program. The program should transfer in real-time. Monitor the recording and, when finished, check for quality
• Copy the program to your external hard drive. Using the video software on your computer, select your external drive as the destination for your next copy. Select the copy you just made from the DVR and make another copy on your external hard drive. Again, monitor the transfer and check for quality when you are finished

Package Included:

• 1 x Network H.264 DVR
• 1 x IR Remote Controller
• 1 x Product Instruction
• 1 x DC19V 2.1A Power Adapter
• 1 x CD
• 1 x USB1.1 Mouse