Digital 16CH 720P H.264 D1 Real-Time Record Network CCTV Standalone DVR with HDMI Port INS-16DVR02

Specifications:

• Embedded Linux OS
• Standard H.264 compression
• 24Ch hybrid video input, D1 real-time recording
• 16Ch Alarm input and 4Ch Alarm output
• Support HDMI, VGA, CVBS, SPOT output
• Support 16Ch Video Loop-out
• 16Ch synchronous playback
• Support mobile phone viewer(Windows Mobile/Symbian/iphone/Android/BlackBerry)
• Embedded Web Server easy for remote monitoring
• 8 SATA interfaces, support up to 16 TB HDD
• Support multiple DDNS(Oray,3322,DynDNS)
• PTZ control by mouse and Controller
• 2 USB interfaces, support mouse and external storage device
• User Friendly GUI, front panel, remote control and mouse
• Support 8Ch 720P/4Ch 1080P HD IPC
• Two-way audio(Support BNC interface and 3.5mm interface) 
• Main Processor: High Performance Embedded Microprocessor
• Operation System: Embedded Linux OS
• Signal System: PAL/NTSC
• System Resourcce: Recording, playback, Remote Access
• Operaion Inerface: Mouse, Front Panel, Remote Control
• Video Split: 1/4/8/9/16/20/25/ Split Display
• Video Resolution: D1(Digital channels support 1080P or 720P)
• Video Playback Resolution: 1080P/720P/D1/HD1/CIF/QCIF
• Video Compression: H.264 CBR/VBR
• Image Control: 6 Levels
• Recording Speed: PAL:25fps/channel, NTSC:30fps/channel
• Motion Detection: Configurable detection areas(22×18 blocks) and Sensitivity
• Audio Compression: G.711
• Recording Priority: Manual>Alarm>Motion>Detection>Schedule
• Local Playback: 16 channel synchronous playback
• Playback Search: Date, Time, Event, Channel
• Video Storage: Local HDD/Network/USB/DVD-RW
• Backup Mode: Network/USB/SATA/DVD-RW
• Video Input: 16 channel BNC
• IPC Input: 8 channel 720P/4 channel 1080P
• Video Output: 1 channel BNC, 1channel VGA(Up to 1920×1080/60Hz)
• Video Loop-out: 16 channel BNC(D-SUB)
• SPOT Output: 1 channel BNC
• Audio Input: 16 channel BNC
• Audio Output: 1 channel BNC
• Audio: 1CH MIC in / Line-out
• Alarm Input: 16 channel
• Alarm Output: 4 channel relay output(30V DC 2A, 125V AC 1A)
• Ethernet Inerface: RJ45 100M/1000M Base-TX
• PTZ Inerface: 2×RS485
• USB Interface: 2×USB2.0
• HDD/SATA Interface: 8×SATA
• Network Keyboard: Support
• Power Supply: AC 100V-240V 50-60HZ
• Power Consunption: <20W(HDD not included)
• Working Temperature: -10 to +55 degree C
• Working Humidity: 10%-90%RH
• Atmosphere Pressure: 86kpa-106kpa
• Enclosure: 2U

Details:

How to Replace a DVR Hard Drive:

• Disconnect your DVR by unplugging any cables connected to it, including the power cable. Remove the screws located on the back of the unit that hold the top cover in place. There are usually two to six of these screws, depending on the model of DVR. Lay these screws in a safe place where they won't get lost, and slide the cover off
• Locate the hard drive. This is a rectangular metal unit that measures 3 1/2 inches wide. It is usually located away from the other hardware, often in its own bracket. There will be two to four screws holding it in place. Remove these, disconnect the cables connected to the drive, and slide it out of the system
• Check the label of the drive to see if it is IDE or SATA. It will say which one of the two interfaces it uses. Any replacement desktop hard drive of the same interface type will work in your DVR. Avoid using a laptop drive, because they won't fit and aren't designed for the high-stress environment of video streaming
• Place the new drive into the brackets, and replace the screws that were removed from the old one. Plug the data and power cables into this drive. They will insert the same way they came out of the old one. Once the drive has been installed, put the cover back on the DVR unit, and replace the screws. Hook the DVR back up to the television, and it will be ready to record

How to Copy From a DVR to an External Hard Drive:

• Install video software on your computer. To properly process your data transfer, you need video software, which you can get from computer and electronics retailers or online. Simple, easy-to-use programs can be downloaded for free. Use reputable sites, such as CNET.com, to find some of the more reputable free programs. More advanced programs, with sophisticated editing capabilities, will usually only be available for purchase
• Connect your computer and DVR. In order to copy programs to your external hard drive, you need to transfer them to your computer. For older systems, and especially for desktop computers, you will need to use use RCA connectors to connect the DVR to the computer. RCA connectors are color-coordinated audio-visual cables used to connect electronics components, such as stereos and receivers, and they can be used with some computers and DVRs as well. Plug the yellow ends of the cable into the video jacks on the machines, then plug the red and white ends into the audio jacks. If you have a newer system, use USB cables to connect the computer and DVR. With a TiVo DVR and a wireless home network, you can connect your components wirelessly if you download proprietary TiVo software
• Transfer the program to your computer. Choose the program you wish to transfer from your DVR then press "Play" while pressing "Record" on your computer software program. The program should transfer in real-time. Monitor the recording and, when finished, check for quality
• Copy the program to your external hard drive. Using the video software on your computer, select your external drive as the destination for your next copy. Select the copy you just made from the DVR and make another copy on your external hard drive. Again, monitor the transfer and check for quality when you are finished

Package Included:

• 1 x 16CH H.264 Digital Video Recorder