Copper Single Handle Cold Hot Basin Faucet-y39

Specifications:

• This faucet is easy to install even without prior experience
• All of our faucets are leak-resistant due to the durability of their ceramic valves and have been tested for quality, which meets or exceeds all applicable industry standards
• The service life of the valve is extraordinary and will withstand more than 600,000 uses, as well as extreme heat
• It is fashionable enough to make your house look modern
• Valve Type: Ceramic Valve
• Material: Copper
• Spout Height: Approx. 80mm / 3.1in

Package Included:

• 1 x Faucet
• 1 x Accessory Set
• 2 x Hoses

General Faucet Installation Instruction:

Step 1: Position the Faucet

Step 2: Attach the Water Supply Tubes

Step 3: Connect the Faucet Lift Rod

Step 4: Flush the Faucet

Cleaning Methods:

• Cleaning Surface: Use cleaning agents to clean the dirt regularly. The water faucet should be rinsed with clean water. Wipe it with a soft cotton cloth to keep surface clean before scrubing the faucet. Do not wipe the faucet with abrasive cleaners, hard cloth, paper towels, wire balls and acidic or coarse materials
• Cleaning Filter: Remove the air bubble and remove the filter. Then scrub the filter with a toothbrush or small brush under the tap

How to Select Faucet:

• Suitable Style: The Faucet should match the characteristics of washbasin, sink and bathtub. For example, single-hole faucets fit single-hole washbasins, and center set faucets fit center set washbasins
• Proper Function: According to different purposes of the faucets, there are faucets for washbasin, bathtub, shower and sink. According to different functions of the faucets, there are hot/cold faucets, pressure-balanced faucets, thermostatic faucets and electrical sensor faucets
• Fine Finish: A well chrome-plated faucet looks dignified and with a little verdant color, when it looks pale, the plating density is not up to standard, when touched by hand or eye-observed, there must be no scratches, sand holes and oxidized spots
• Operation Inspection: Handles must be smooth and easy to operate for high-quality faucets. There shall be no sticking and tightness under the proper movement of the faucet handles. Each part must be tightly assembled
• Valve: It is the heart of the faucet. A good Valve guarantees endurance of 500,000 cycles even under using condition with unstable water pressure. Most of our faucets use ceramic valves which can attain to more than 600,000 cycles

NOTE:

• Please clean the residual dirty water, debris, sands and impurities before the installation to avoid foaming, obstruction and valve damage