Durable Copper Single Cold Faucet Water Triangle Valve

Specifications:

• It connect the effusive hose and two inflow hoses
• The switch is convenient and wearproof
• The service life of ceramic valve can attain to more than 500,000 times which allows our faucets to be used for a long time
• Valve face resists hard water buildup and is easy to clean
• Sensible styling that complements any home
• It's easy for you to install the faucet correctly even if you never install faucets before
• Solid body construction and mirror body ensures a clear, heavy duty, rustless, oxidation-resistant
• Material: Copper
• Pipe Diameter: 20mm / 0.8in

Details:

• The switch is convenient and wearproof

• Excellent corrosion resistance

How to Change a Water Faucet Valve

• Turn the water off under the sink. There are two valves located on the back wall. Turn both of them clockwise to shut them off. Turn the water handles on to release the pressure in the lines. Plug the sink drain with a stopper to avoid losing any parts down the drain.
• Use a flat tip screw driver to remove the hot or cold decorative cover plate. Slide the tip of the screwdriver under the the edge of the cover plate and pry up. The cover plate will pop off. It is only held on by metal expansion clips. The cover plate is in the center of the handle. You only need to take off the coverplate to the handle where the leak is occurring.
• Use the philips head screwdriver to remove the screw in the center of the handle. Pull up on the handle to remove it. The handle will slide off of the valve.
• Use your pliers to loosen the nut at the base of the exposed valve. Turn the nut counter clockwise. Once the valve is loose enough it can then be removed by hand. Take the valve with you to the building supply store. It is much easier to get the exact valve when you have the old one.
•  
• Insert the new valve into the exact same place on the sink from where you removed the old one. Use your pliers to completely tighten the valve. Place the handle on the stem and insert the screw. Tighten the screw with the philips head screwdriver. Reinsert the decorative cap by pushing down on it. It will pop back in place. Turn the water back on.

Package Included:

• 1 x Copper Single Cold Faucet Water Triangle Valve
• 1 x Gasket