-
-
Specifications:
- 60W Metal Head Hot Melt Glue is designed with switch
- The glue is melted as soon as possible, press the trigger that is able to extrude
- Completely portable, it can let you work almost anywhere
- Plug the power, the glue gun is melted after 5 minutes
- Hot Melt Glue Gun with Switch is heating up quickly & long life to use
- Power: 60W
- Glue Stick: 11mm / 0.4in(Dia.)
Details:

- Ergonomic design long trigger for less effort
How to Use a Glue Gun:
- Plug the glue gun into an electrical outlet. Make sure it is placed in a secure place, away from flammable items. As the glue gun heats up, a little bit of glue might drip from the end so you won't want to leave it on a wood table or on carpet
- Insert a glue stick into the back of the glue gun. If the glue gun already has a glue stick in the chamber, keep a second one in reserve nearby
- Gather the materials you want to glue together. Hot glue works exceptionally well on thick fabrics, dried flowers, Styrofoam, wood and plastics. Since it leaves a thicker residue, it is not the best choice for thin papers, fabrics and ceramics
- Check to see if the glue in the gun has melted by squeezing the trigger slightly and touching the tip to a test piece of paper. If the glue comes out easily, the glue gun has heated up fully. If the trigger is hard to pull, wait a minute more for the gun to heat more completely
- Pick up the glue gun and squeeze the trigger slightly while you draw a thin line on one side of the item to be glued
- Immediately place the other object to be glued on the glue line, pressing firmly
- Hold the two pieces together for about 15 seconds. Test to see if the item still holds when you remove one hand
- Let the item set for a few minutes in order to "cure." Once the glue has dried fully, use a fingernail to scrape away any of the excess glue
How to Clean a Glue Gun:
- Unplug the hot glue gun. Prop up the stand carefully. The stand is located at the front of the gun, near the nozzle
- Stand the gun up on a heatproof surface during the cooling session. When the gun is completely cool, proceed. Thirty minutes is ample time to allow the gun to cool down
- Remove two fabric-softening sheets from the package. Stack them on top of one another
- Wipe down the gun handle, nozzle and barrel with the dryer sheets. Continue to wipe until the glue residue is gone. Toss the dryer sheets away. The glue gun will be free of glue
Tips & Warnings:
- Put the finished item in the freezer for a few moments. The stray strings of hot glue will freeze and become brittle and can then just be brushed off
- Do not touch the hot glue or the area of contact (such as on fabrics). You can sustain deep burns through felt or fabrics
Package Included:
- 1 x Hot Melt Glue Gun
- 1 x Power Cable
Get DinoPoint™ by Writing reviews, Post Images, or Post Videos. The first five customers can get double points!
Maybe you are interested in:



















































