-
-
Specifications:
- This Aluminum Alloy 13mm Gun Rail Mount is made with aluminum alloy of high quality
- Precision machined
- Mounts to M16 guns
- The Aluminum Alloy M16 Gun Rail Mount S8607
- This Aluminum Alloy 13mm Gun Rail Mount is easy to install
- Quick detachable design for fast installation or detachment
- Material: Aluminum Alloy
- Dimensions: 11.43 x 2.03 x 1.27cm/4.5 x 0.8 x 0.5in
Details:


- The Gun Rail Mount is constructed of Aluminum Alloy to prevent corrosion for lasting durability

- The Removable Weaver Style Rails are Customizable so you can attach any other type of rail mounted accessories


- Gun rail mount is precision machined
- This Aluminum Alloy 13mm Gun Rail Mount is easy to install
How to Construct a Rail Gun:
- Spread some white glue on the cardboard that will form the base of your rail gun. Make sure that the layer of white glue is evenly and thoroughly distributed. You can use a brush or a piece of cardboard to help you complete this step
- Press the two foil strips onto the cardboard base when you are constructing a rail gun. Make sure they're flat and smooth, and are about ½ inches apart. You can use a ruler and a pencil to mark where the strips should lay on the cardboard, so you can make sure they're perfectly straight. Allow the two inches of the foil to hang off one end of the cardboard
- Clip one end of the alligator leads to the foil ends, and the other to the 9 volt battery
- Use a hand file to make the ends of the wire from the coat hanger flat. You can file them so the flat ends are perpendicular to the rest of the wire's length. Add the magnets to the ends of the wire. Make sure that the poles of each of the magnets are facing in the opposite direction from each other, so they repel each other. This will form the "wheels" of your rail gun
- Place wheels on the rails or the strips of aluminum foil and watch them take off. If they don't move, check your magnets and make sure they're on the wire so the poles are pointing in opposite directions
Package Included:
- 1 x Aluminum Alloy 13mm Gun Rail Mount S8603
Get DinoPoint™ by Writing reviews, Post Images, or Post Videos. The first five customers can get double points!
Archibald
from ()
Bought this item on
08-09-2011- Other Thoughts: In my case, I planned on attaching these to and older wood stock. So I knew from the start I would need my own screws, etc.
Was this review helpful?
Jerome
from ()
Bought this item on
08-17-2011- Other Thoughts: I've seen guys with Gun Rail on their standard AR-15 handguards, and I can imagine the crafty use of them on FAL/HK-91 handguards. You'd likely have to figure out your own washer/screw combo at your local hardware store for that.
Was this review helpful?
Josie
from ()
Bought this item on
11-09-2011- Other Thoughts: My handguards were not pre-drilled/tapped to receive the bolts included. Other than a quick trip to Home Depot, these rails rock.
Was this review helpful?
Candice
from ()
Bought this item on
01-14-2012- Other Thoughts: These rails are well made and look great. They were easy to cut to fit where needed and bolted on my Zastava PAP easily. I now have rail space on the bottom of the hand rail as well as both sides.
Was this review helpful?
Honey
from ()
Bought this item on
01-18-2012- Other Thoughts: I bought this rail system and it is great but the only downfall is that you have to buy new screws because the ones sent are too short you need washers and nuts just to mount it so if you are going to buy this plan on a trip to the hardware store for parts
Was this review helpful?
Maybe you are interested in:
















![Palight PALIGHT PA 18,650 rechargeable lithium battery 3300mAh[A+ charge and discharge of 1000 times] single grain prices](http://p.lefux.com/61/20130307/X00010HQNF/palight-pa-18-650-rechargeable-lithium-battery-3300mah-a-cha-5527047-small.jpg)


![Palight 26,650 PALIGHT rechargeable Li-battery heater single price [a level + import core] with protection plate](http://p.lefux.com/61/20130307/X00010HQGV/26-650-palight-rechargeable-li-battery-heater-single-price-a-5526255-small.jpg)










































































































