1.8m High Speed Support 3D HDMI to VGA Computer TV Cable

Specifications:

• The High-Speed 3D HDMI VGA cable can help you obtain the maximum performance from your latest high-definition electronic devices
• Use this 1.8m long VGA computer TV cable to connect your HDTV to your cable box, satellite dish, Blu-Ray player, and more, and experience quality audio and video from your home
• The HDMI to VGA cable connects your HDTV to your cable box, satellite dish, Blu-Ray player, and other source devices
• This HDMI to VGA cable is constructed with durable, black outer layer; shielding; and corrosion-resistant, firm connectors for optimal signal transfer
• Size: 1.8m/5.9ft(L)

Details:

• The High-Speed HDMI to VGA cable can help you obtain the maximum performance from your latest high-definition electronic devices

• The HDMI to VGA cable is constructed with durable, black outer layer; shielding; and corrosion-resistant, firm connectors for optimal signal transfer

• Gold-plated HDMI to VGA cable, durable and reliable

• Easy to install on/off

How to Use a VGA Port on a Computer:

• Turn your computer around or move to the back so you can clearly see the port.
• Match the shape of the connector to the shape of the port. If you look at the connection on the cable from your monitor, you will see a metal rectangle protruding out of a metal base. Inside the rectangle are pins. One end of the rectangle is smaller than the other. This will line up with the port. Turn the shortened end so that it is facing the same direction as the short end on the port.
• Slide the cable connection into the port so that is fits snugly.
• Tighten the screws on the cable into the computer. On each side of the rectangle on your cable connection are tiny screws. These correspond with threads on either side of the port. Turn the screws with your fingers or a small flat head screwdriver until they are tight. You will need to press the connection into the port as you tighten the screws. Do not make them too tight; they will be difficult to unscrew if you need to disconnect the monitor

How to Use HDMI to Maximize Picture Quality: 

• Look in the back of your HD television. You should see one or more input jacks labeled "HDMI." This is where the HDMI cable is attached--differing visually from the normal A/V cables in that there is only a single jack instead of three color-coded A/V jacks
• Attach one end of an HDMI cable to the HDMI output jack on the back of your cable box, satellite box or HD/Blu-Ray DVD player
• Attach the other end of the HDMI cable to the HDMI input jack on your television
• Turn on your TV, and give it a little time to warm up--about 5 to 10 minutes should suffice
• Press the "input" button on your remote until it indicates that the TV is receiving signals from the HDMI input jack. A message will usually flash on the TV screen, stating "HDMI 1"
• Check the signals from your input box. They usually allow you to adjust the level of signal you can send, in figures ranging from 480i to 1080p. The higher the number, the greater the resolution will be
• Adjust the aspect ratio, either on your cable/satellite/DVD remote or on your TV remote. In order to maximize the picture quality, you want to make sure the aspect ratio is correct for your TV (usually either 16:9 or 4:3). You'll be able to tell if it isn't correct, because the figures onscreen will appear stretch or elongated
• Use the TV remote control to adjust the brightness, contrast, color and tint to match your particular tastes. Most HD TVs have factory settings that will work for your average viewing conditions. Once you're receiving a signal from the HDMI cable, you can tweak the particulars to fit your needs

Package Included:

• 1 x High Speed 1.8m Support 3D HDMI to VGA Computer TV Cable