-
-
Specifications:
- It is designed to replace your damaged , broken, cracked improper or non-function cable
- Steady signal and flexible
- This Flex Ribbon Connector Cable is easy to install and no need to pay for high repairing fee
- Perfectly fits for original HTC S710 connecting key button function
- This is a non-OEM generic product
- Compatible with: HTC S710
Details:

- When you cell phone screen change to white or turn off often, you must need to replace a Flat Ribbon Cable in the mobile phone
- Precision molded of the Ribbon Connector Cables perfectly fit your mobile phone



- Replace the faulty or damaged part with the new Ribbon Connector Cable
How to Connect Ribbon Cable:
- Closely examine both the cable and the connector that the cable is going to be connected to. In many cases the ribbon cable's connector will be keyed, either with one or more holes being blocked off in the female connector (with a corresponding removal of pins from the mating male connector) or by an additional "bump out" being added to one side of the connector and a corresponding slot cut out from its mate.
- Some ribbon cables will have a twist in one or more wires and this is a clear indication that this cable must be installed paying specific attention to which end connects to which connector of the device. In all cases, thoroughly checking for any makings on the cable itself or the connector is recommended. In many cases, pin one is marked with a distinctive stripe on the edge of the ribbon cable where pin one is located
- Line up the male and female connector squarely. Once you have clearly ascertained which end of the connector is designed to go where and you have located where pin one is oriented, lining up the male and female connector squarely is imperative. Ribbon connectors must be inserted directly into the receiving connector and any deviation from this may cause the connector to crack which can result in pins being bent.
- Usually, very little force is required to insert the cable's connector into the mating connector, and if you sense resistance to the connector sliding into its mate, it is recommended that you remove the cable from the connector and reexamine both sides of the connection to see if there are issues
- Note that some ribbon cables, specifically the high density 80 pin IDE cables found in may computers, not only require that careful attention be paid to which connector is connected to which plug, but also which device is connected to which connector. In cases such as this, the connectors are usually clearly marked
- If, for whatever reason, the male connector's pins become bent, using a pair of needlenose pliers will allow you to straighten the pins. Be careful, these pins are usually hollow and squeezing the pins too hard will crush them and make it impossible for you to connect the cable
- One type of ribbon cable, found commonly in laptop computers, have no connectors mounted to the cable themselves. In these assemblies, the cable is usually made from a Mylar film (or something similar) with the conducting paths embedded into the cable's base material. These cables can be particularly tricky and require both patience and finesse.
- To insert these cables into their mating receptacle, line up the ribbon squarely with its mating connector. Now gently slide the ribbon into the connector making sure that it doesn't go into the connector at an angle. Please note, a sharp bend might degrade or destroy the cable's conductivity
NOTE:
- No instructions or tools are provided for this listing
- This is not an easy job for someone who has no technical skills
- We will not be held responsible for any damages to your cell phone that you may cause during the changing of replacement parts
- Please always use a professional repair service or expert for your repair works
Package Included:
- 1 x Replacement Key Flex Ribbon Connector Cable for HTC S710
Get DinoPoint™ by Writing reviews, Post Images, or Post Videos. The first five customers can get double points!
Farkas István
from ()
Bought this item on
02-22-2011- Other Thoughts: Lo pedí de back up con otro kit que fue el que instalé, lo califico ahora porque no pienso usarlo en un buen tiempo, a lo que respecta envío muy bien y podría decir que se parecía más al original que el que instalé. El otro venia con su botón por eso lo puse. Si funciona o no aun no puedo decirlo.
Was this review helpful?
Giuseppe De Matteo
from ()
Bought this item on
04-27-2011- Other Thoughts: This flex cable product is fine, but if you are buying it to resolve an unresponsive touch screen problem with your phone.
Was this review helpful?
AH Thimister-Rondagh
from ()
Bought this item on
02-10-2011- Other Thoughts: I purchased a used phone and when I received it, the home button wasn't working. So I bought this replacement home button on Amazon. Just replaced it with my old button and it works perfectly. So far, I don't have any problems with it. Great buy!
Was this review helpful?
Kritaya Lamsam
from ()
Bought this item on
04-07-2011- Other Thoughts: Worked great. The only thing that could have made it better would have been to include instructions of any type. Went on line and found a video on how to do it.
Was this review helpful?
manuel
from ()
Bought this item on
03-10-2011- Other Thoughts: In combination with a new Home Buttom I purchased from the same company, I replace the button and this flex ribbon on my iPhone. It was so broken and I was so depressed about it until I fixed it with these. So happy and I feel pretty smart about it too.
Was this review helpful?
Maybe you are interested in:
-
by HMingR$ 596,69
-
by AinarR$ 18,69
-
by Tough GirlR$ 76,39



























































































































