Customers Also Bought
- Beam Angle: 15 degree
- Wavelength: 850nm
- Compatible with: Camera lens
- Dimension: 64mm / 2.52in (Outer Diameter) ; 31mm / 1.22in (Inner Diameter) ; 10mm / 0.4in (H) ; 48mm / 1.89in (Auxiliary Illuminator Board Plate)
- Voltage: DC 12V
- 66 IR LED Illuminator Board Plate for CCTV security cameras
- A replaceable LED illuminator board plate for your broken or worn out IR LED board
- This Camera Illuminator Board has very bright infrared LEDs without much energy consume
- 15 degree 66 LED Illuminator Board Plate for CCTV security cameras
- This LED Illuminator Plate is easy to clean and do not rust
- A replaceable Infrared Illuminator Board for your broken or worn out IR LED board
- This Camera Illuminator Board Plate has great performance without much energy consume
- Add a distinctive flair to your CCTV video camera with this fantastic Illuminator Board Plate
- Built-in auto protection circuit against damaging the illuminator board plate by high voltage
- This is a 15 Degree Infrared 66-LED Illuminator Board Plate for CCTV Infrared Lamp with Regulator Board. Replace such IR LED board for your CCTV security camera
- Replace a camera LED board for your broken or worn out IR LED board
- Very bright infrared LED illuminator board plate with 66 lights
- Add a distinctive flair to your CCTV video camera with our fantastic illuminator board plate
Operating Instructions for IR Illuminators:
- Turn off your security camera system so there is no live current flowing through the system. Place a ladder against the wall securely so that you can reach the security camera you want attach the IR illuminator to. Screw the attachment plate that came with the IR illuminator to the side of the IR camera. There are two screw holes on the side of the camera for the attachment plate and the screws came with the IR kit. Then screw the IR illuminator to the attachment plate with the other two screws included in the kit
- Loosen the screws that secure the IR camera to the camera mount and flip the camera to the side to expose the underside of the IR camera. Rotate the back end of the IR camera off to expose the inside of the IR camera. Thread both wires through their waterproof seals. Thread the control wire and the power cord through the hole on the bottom and pull those wires towards the rear of the inside of the camera. Locate the control cable port, it will look like the underside of a lego piece, press the camera control plug into the port. Then locate the power port and plug the power cord into the port
- Rotate the back of the IR camera back onto the end of the camera. Screw down all four of the waterproof seals, one for each wire end. The seals should be flush with the side of the ports. Flip the IR camera back onto the mount and rescrew it down. Turn your security camera system back on and turn the IR camera on. The IR illuminator will automatically come on. Compare the image with the area that you want to monitor, go back and adjust the IR camera on it's mount to give a better image if it is a fixed camera. If the camera can rotate under it's own power then move the camera via the joystick on the camera control board
- 1 x 15 Degree Infrared 66-LED Illuminator Board Plate for CCTV Security Camera
If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Before that, please contact our Live Support to inform that.
In that case we will refund you the payment excluding actual shipping fees already incurred.
If the item is defective, please contact DinoDirect Live Support and send an email to us at firstname.lastname@example.org attached an image or video file clearly showing the defect of the product. And we will give you a response within 24 hours whether we will resend the item or refund the payment to you for compensation.
For customization, please consider carefully before ordering.Because we do not accept return and replacement.
|Unit Price||USD$ 7.32||USD$ 7.29||USD$ 7.25||USD$ 7.21|
|Enter Wholesale Channel>>|
• If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
• If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Please contact our Live Support to inform that.
• Please contact Live Chat or click here to learn more return policy.